AT91SAM7X128-CU Atmel, AT91SAM7X128-CU Datasheet - Page 658

• Manufacturer Part Number: AT91SAM7X128-CU
• Description: MCU ARM 128K HS FLASH 100-TFBGA
• Manufacturer: Atmel
• Series: AT91SAMr

Specifications of AT91SAM7X128-CU

• Core Processor: ARM7
• Core Size: 16/32-Bit
• Speed: 55MHz
• Connectivity: CAN, Ethernet, I²C, SPI, SSC, UART/USART, USB
• Peripherals: Brown-out Detect/Reset, DMA, POR, PWM, WDT
• Number Of I /o: 62
• Program Memory Size: 128KB (128K x 8)
• Program Memory Type: FLASH
• Ram Size: 32K x 8
• Voltage - Supply (vcc/vdd): 1.65 V ~ 1.95 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 100-TFBGA
• For Use With: AT91SAM-ICE - EMULATOR FOR AT91 ARM7/ARM9AT91SAM7X-EK - KIT EVAL FOR AT91SAM7X256/128
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

41.3.11.2
41.3.11.3
41.3.11.4
658
AT91SAM7X512/256/128 Preliminary
USART: Hardware Handshaking – Two Characters Sent
USART: RXBRK Flag Error in Asynchronous Mode
USART: DCD is Active High instead of Low.
None.
If CTS switches from 0 to 1 during the TX of a character and if the holding register (US_THR) is
not empty, the content of US_THR will also be transmitted.
Don't use the PDC in transmit mode and do not fill US_THR before TXEMPTY is set at 1.
When timeguard is 0, RXBRK is not set when the break character is located just after the Stop
bit. FRAME (Frame Error) is set instead.
Timeguard should be > 0.
The DCD signal is active at High level in the USART Modem Mode .
DCD should be active at Low level.
Add an inverter.
Problem Fix/Workaround
Problem Fix/Workaround
Problem Fix/Workaround
6120H–ATARM–17-Feb-09