MC908QC16CDZE Freescale Semiconductor, MC908QC16CDZE Datasheet - Page 205

• Manufacturer Part Number: MC908QC16CDZE
• Description: IC MCU 8BIT 16K FLASH 28-SOIC
• Manufacturer: Freescale Semiconductor
• Series: HC08r

Specifications of MC908QC16CDZE

• Core Processor: HC08
• Core Size: 8-Bit
• Speed: 8MHz
• Connectivity: SCI, SPI
• Peripherals: LVD, POR, PWM
• Number Of I /o: 24
• Program Memory Size: 16KB (16K x 8)
• Program Memory Type: FLASH
• Ram Size: 512 x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 5.5 V
• Data Converters: A/D 10x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 28-SOIC (7.5mm Width)
• Processor Series: HC08QC
• Core: HC08
• Data Bus Width: 8 bit
• Data Ram Size: 512 B
• Interface Type: ESCI/SPI
• Maximum Clock Frequency: 8 MHz
• Number Of Programmable I/os: 26
• Number Of Timers: 6
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Development Tools By Supplier: FSICEBASE, M68CBL05AE, DEMO908QB8, DEMO908QC16
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10-ch x 10-bit
• For Use With: DEMO908QC16 - BOARD DEMO FOR MC908QC16
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Chapter 17
Timer Interface Module (TIM2)
17.1 Introduction
This section describes the timer interface module (TIM2). The TIM2 module is a 2-channel timer that
provides a timing reference with input capture, output compare, and pulse-width-modulation functions.
The TIM2 module shares its pins with general-purpose input/output (I/O) port pins. See
port location of these shared pins.
17.2 Features
Features include the following:
17.3 Functional Description
Figure 17-2
can operate as a free-running counter or a modulo up-counter. The counter provides the timing reference
for the input capture and output compare functions. The counter modulo registers, T2MODH:T2MODL,
control the modulo value of the counter. Software can read the counter value, T2CNTH:T2CNTL, at any
time without affecting the counting sequence.
The two TIM2 channels are programmable independently as input capture or output compare channels.
17.3.1 TIM2 Counter Prescaler
The TIM2 clock source is one of the seven prescaler outputs or the external clock input pin, T2CLK if
available. The prescaler generates seven clock rates from the internal bus clock. The prescaler select
bits, PS[2:0], in the TIM2 status and control register (T2SC) select the clock source.
Freescale Semiconductor
•
•
•
•
•
•
Two input capture/output compare channels
–
–
Buffered and unbuffered output compare pulse-width modulation (PWM) signal generation
Programmable clock input
–
–
Free-running or modulo up-count operation
Toggle any channel pin on overflow
Counter stop and reset bits
Rising-edge, falling-edge, or any-edge input capture trigger
Set, clear, or toggle output compare action
7-frequency internal bus clock prescaler selection
External clock input pin if available, See
shows the structure of the TIM2. The central component of the TIM2 is the 16-bit counter that
MC68HC908QC16 • MC68HC908QC8 • MC68HC908QC4 Data Sheet, Rev. 5
Figure 17-1
Figure 17-1
for
205