HD64F3664FPV Renesas Electronics America, HD64F3664FPV Datasheet - Page 118

• Manufacturer Part Number: HD64F3664FPV
• Description: IC H8/3664 MCU FLASH 32K 64LQFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8/300H Tinyr

Specifications of HD64F3664FPV

• Core Size: 16-Bit
• Program Memory Size: 32KB (32K x 8)
• Oscillator Type: External
• Core Processor: H8/300H
• Speed: 16MHz
• Connectivity: I²C, SCI
• Peripherals: PWM, WDT
• Number Of I /o: 29
• Program Memory Type: FLASH
• Ram Size: 2K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 5.5 V
• Data Converters: A/D 8x10b
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 64-LQFP
• No. Of I/o's: 29
• Ram Memory Size: 2KB
• Cpu Speed: 16MHz
• No. Of Timers: 4
• Digital Ic Case Style: LQFP
• Supply Voltage: RoHS Compliant
• Controller Family/series: H8/300H
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Section 6 Power-Down Modes
6.2
Figure 6.1 shows the possible transitions among these operating modes. A transition is made from
the program execution state to the program halt state of the program by executing a SLEEP
instruction. Interrupts allow for returning from the program halt state to the program execution
state of the program. A direct transition between active mode and subactive mode, which are both
program execution states, can be made without halting the program. The operating frequency can
also be changed in the same modes by making a transition directly from active mode to active
mode, and from subactive mode to subactive mode. RES input enables transitions from a mode to
the reset state. Table 6.2 shows the transition conditions of each mode after the SLEEP instruction
is executed and a mode to return by an interrupt. Table 6.3 shows the internal states of the LSI in
each mode.
Rev. 6.00 Mar. 24, 2006 Page 88 of 412
REJ09B0142-0600
Notes: 1. To make a transition to another mode by an interrupt, make sure interrupt handling is after the interrupt
Program halt state
Standby mode
Mode Transitions and States of LSI
Reset state
2. Details on the mode transition conditions are given in table 6.2.
is accepted.
SLEEP
instruction
SLEEP
instruction
Interrupt
Figure 6.1 Mode Transition Diagram
Program execution state
transition
interrupt
Direct
Active mode
Subactive
mode
transition
interrupt
Direct
SLEEP
instruction
SLEEP
instruction
Direct transition
interrupt
Direct transition
interrupt
Interrupt
SLEEP
instruction
Interrupt
SLEEP
instruction
Interrupt
Interrupt
Program halt state
Subsleep mode
Sleep mode