DF2328BVF25V Renesas Electronics America, DF2328BVF25V Datasheet - Page 134

• Manufacturer Part Number: DF2328BVF25V
• Description: IC H8S MCU FLASH 256K 128QFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8S/2300r

Specifications of DF2328BVF25V

• Core Processor: H8S/2000
• Core Size: 16-Bit
• Speed: 25MHz
• Connectivity: SCI, SmartCard
• Peripherals: DMA, POR, PWM, WDT
• Number Of I /o: 87
• Program Memory Size: 256KB (256K x 8)
• Program Memory Type: FLASH
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 3.6 V
• Data Converters: A/D 8x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 128-QFP
• For Use With: EDK2329 - DEV EVALUATION KIT H8S/2329
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Other names: HD64F2328BVF25V

Section 4 Exception Handling
4.1.2
Exceptions originate from various sources. Trap instructions and interrupts are handled as follows:
1. The program counter (PC), condition code register (CCR), and extend register (EXR) are
2. The interrupt mask bits are updated. The T bit is cleared to 0.
3. A vector address corresponding to the exception source is generated, and program execution
For a reset exception, steps 2 and 3 above are carried out.
4.1.3
The exception sources are classified as shown in figure 4.1. Different vector addresses are
assigned to different exception sources.
Table 4.2 lists the exception sources and their vector addresses.
In modes 6 and 7, the on-chip ROM available for use after a power-on reset is the 64-kbyte area
comprising addresses H'000000 to H'00FFFF. Care is required when setting vector addresses. In
this case, clearing the EAE bit in BCRL enables the 256-kbyte (128 kbytes/384 kbytes/512
kbytes)* area comprising addresses H'000000 to H'03FFFF (to H'01FFFF/H'05FFFF/H'07FFFF)
to be used. For details, see section 6.2.5, Bus Control Register L (BCRL).
Note: * The amount of on-chip ROM differs depending on the product.
Rev.6.00 Sep. 27, 2007 Page 102 of 1268
REJ09B0220-0600
pushed onto the stack.
starts from that address.
Exception Vector Table
Exception Handling Operation
Exception
sources
• Reset
• Trace
• Interrupts
• Trap instruction
Figure 4.1 Exception Sources
External interrupts: NMI, IRQ7 to IRQ0
Internal interrupts: interrupts from on-chip
supporting modules