DF2328BVF25V Renesas Electronics America, DF2328BVF25V Datasheet - Page 749

• Manufacturer Part Number: DF2328BVF25V
• Description: IC H8S MCU FLASH 256K 128QFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8S/2300r

Specifications of DF2328BVF25V

• Core Processor: H8S/2000
• Core Size: 16-Bit
• Speed: 25MHz
• Connectivity: SCI, SmartCard
• Peripherals: DMA, POR, PWM, WDT
• Number Of I /o: 87
• Program Memory Size: 256KB (256K x 8)
• Program Memory Type: FLASH
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 3.6 V
• Data Converters: A/D 8x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 128-QFP
• For Use With: EDK2329 - DEV EVALUATION KIT H8S/2329
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Other names: HD64F2328BVF25V

16.5
The A/D converter generates an A/D conversion end interrupt (ADI) at the end of A/D conversion.
ADI interrupt requests can be enabled or disabled by means of the ADIE bit in ADCSR.
The DTC or DMAC * can be activated by an ADI interrupt. Having the converted data read by the
DTC or DMAC * in response to an ADI interrupt enables continuous conversion to be achieved
without imposing a load on software.
The A/D converter interrupt source is shown in table 16.6.
Note: * The DMAC is not supported in the H8S/2321.
Table 16.6 A/D Converter Interrupt Source
Interrupt Source
ADI
Note: * The DMAC is not supported in the H8S/2321.
φ
ADTRG
ADST
Internal trigger signal
Interrupts
Description
Interrupt due to end of conversion
Figure 16.6 External Trigger Input Timing
Section 16 A/D Converter (8 Analog Input Channel Version)
Rev.6.00 Sep. 27, 2007 Page 717 of 1268
DTC Activation
Possible
A/D conversion
DMAC Activation *
Possible
REJ09B0220-0600