DF2328BVF25V Renesas Electronics America, DF2328BVF25V Datasheet - Page 788

• Manufacturer Part Number: DF2328BVF25V
• Description: IC H8S MCU FLASH 256K 128QFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8S/2300r

Specifications of DF2328BVF25V

• Core Processor: H8S/2000
• Core Size: 16-Bit
• Speed: 25MHz
• Connectivity: SCI, SmartCard
• Peripherals: DMA, POR, PWM, WDT
• Number Of I /o: 87
• Program Memory Size: 256KB (256K x 8)
• Program Memory Type: FLASH
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 3.6 V
• Data Converters: A/D 8x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 128-QFP
• For Use With: EDK2329 - DEV EVALUATION KIT H8S/2329
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Other names: HD64F2328BVF25V

Section 19 ROM
Bit 3—Flash Memory Control Register Enable (FLSHE): Controls CPU access to the flash
memory control registers (FLMCR1, FLMCR2, EBR1, and EBR2). Writing 1 to the FLSHE bit
enables the flash memory control registers to be read and written to. Clearing FLSHE to 0
designates these registers as unselected (the register contents are retained).
Bit 3
FLSHE
0
1
Bits 2 and 1—Reserved: These bits cannot be modified and are always read as 0.
Bit 0—Reserved: This bit should not be written with 0.
19.5.6
RAMER specifies the area of flash memory to be overlapped with part of RAM when emulating
real-time flash memory programming. RAMER is initialized to H'00 by a reset and in hardware
standby mode. It is not initialized in software standby mode. RAMER settings should be made in
user mode or user program mode.
Flash memory area divisions are shown in table 19.8. To ensure correct operation of the emulation
function, the ROM for which RAM emulation is performed should not be accessed immediately
after this register has been modified. Normal execution of an access immediately after register
modification is not guaranteed.
Bits 7 to 4—Reserved: These bits cannot be modified and are always read as 0.
Rev.6.00 Sep. 27, 2007 Page 756 of 1268
REJ09B0220-0600
Bit
Initial value :
R/W
RAM Emulation Register (RAMER)
Description
Flash control registers are not selected for addresses H'FFFFC8 to H'FFFFCB
Flash control registers are selected for addresses H'FFFFC8 to H'FFFFCB
:
:
—
—
7
0
—
—
6
0
—
—
5
0
—
—
4
0
RAMS
R/W
3
0
RAM2
R/W
2
0
RAM1
R/W
1
0
(Initial value)
RAM0
R/W
0
0