HD6417709SF133B Renesas Electronics America, HD6417709SF133B Datasheet - Page 446

• Manufacturer Part Number: HD6417709SF133B
• Description: IC SUPERH MPU ROMLESS 208LQFP
• Manufacturer: Renesas Electronics America
• Series: SuperH® SH7700r

Specifications of HD6417709SF133B

• Core Processor: SH-3
• Core Size: 32-Bit
• Speed: 133MHz
• Connectivity: EBI/EMI, FIFO, IrDA, SCI, SmartCard
• Peripherals: DMA, POR, WDT
• Number Of I /o: 96
• Program Memory Type: ROMless
• Ram Size: 16K x 8
• Voltage - Supply (vcc/vdd): 1.65 V ~ 2.05 V
• Data Converters: A/D 8x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 208-LQFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -
• Program Memory Size: -

12.3
Each of three channels has a 32-bit timer counter (TCNT) and a 32-bit timer constant register
(TCOR). TCNT counts down. The auto-reload function enables cycle counting and counting by
external events. Channel 2 has an input capture function.
12.3.1
When the STR0–STR2 bits in the timer start register (TSTR) are set to 1, the corresponding timer
counter (TCNT) starts counting. When a TCNT underflows, the UNF flag of the corresponding
timer control register (TCR) is set. At this time, if the UNIE bit in TCR is 1, an interrupt request is
sent to the CPU. Also at this time, the value is copied from TCOR to TCNT and the down-count
operation is continued.
The count operation is set as follows (figure 12.2):
1. Select the counter clock with the TPSC2–TPSC0 bits in the timer control register (TCR). If the
2. Use the UNIE bit in TCR to set whether to generate an interrupt when TCNT underflows.
3. When using the input capture function, set the ICPE bits in TCR, including the choice of
4. Set a value in the timer constant register (TCOR) (the cycle is the set value plus 1).
5. Set the initial value in the timer counter (TCNT).
6. Set the STR bit in the timer start register (TSTR) to 1 to start operation.
Rev. 5.00, 09/03, page 400 of 760
external clock is selected, set the TCLK pin to input mode with the TOCE bit in TOCR, and
select its edge with the CKEG1 and CKEG0 bits in TCR.
whether or not to use the interrupt function (channel 2 only).
TMU Operation
General Operation