Z16C3516VSG Zilog, Z16C3516VSG Datasheet - Page 194

• Manufacturer Part Number: Z16C3516VSG
• Description: IC 16MHZ Z8500 CMOS ISCC 68-PLCC
• Manufacturer: Zilog
• Series: IUSC™r

Specifications of Z16C3516VSG

• Controller Type: Serial Communications Controller (SCC)
• Interface: USB
• Voltage - Supply: 4.75 V ~ 5.25 V
• Current - Supply: 50mA
• Operating Temperature: 0°C ~ 70°C
• Mounting Type: Surface Mount
• Package / Case: 68-LCC (J-Lead)
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 269-4690-5; Z16C3516VSG

Application Note
Serial Communication Controller (SCC
RECEIVE INTERRUPTS ON FIRST CHARACTER OR SPECIAL CONDITIONS
The sequence of events in this mode is similar to that in
“Receive Interrupts on all received characters and Special
Conditions”, except that it generates Receive Character
Interrupt on the first received character only, and
subsequent data is read by the DMA.
The SCC is placed in this mode by programming Bit D4-3
of WR1 to 01. Once programmed in this mode, the SCC
11-6
Figure 3. Typical SDLC Receive Sequence with Receive Interrupts on First Character or Special Condition
™
): SDLC Mode of Operation
generates interrupts when it receives the First Character of
the packet or a Special Condition occurs. This mode is for
operation with the DMA. On the interrupt for the first
received character, DMA is enabled. On Special
Conditions (either End-of-Message, overrun, or Parity
error, — parity on the SDLC is not normal, however), the
service routine stops the DMA and starts over again.
UM011001-0601