MC68HC705X32CFU Freescale Semiconductor, MC68HC705X32CFU Datasheet - Page 151

• Manufacturer Part Number: MC68HC705X32CFU
• Manufacturer: Freescale Semiconductor

Specifications of MC68HC705X32CFU

• Cpu Family: HC05
• Device Core Size: 8b
• Frequency (max): 4MHz
• Interface Type: SCI
• Program Memory Type: EPROM
• Program Memory Size: 32KB
• Total Internal Ram Size: 528Byte
• # I/os (max): 32
• Number Of Timers - General Purpose: 1
• Operating Supply Voltage (typ): 5V
• Operating Supply Voltage (max): 5.5V
• Operating Supply Voltage (min): 4.5V
• On-chip Adc: 8-chx8-bit
• Instruction Set Architecture: CISC
• Operating Temp Range: -40C to 85C
• Operating Temperature Classification: Industrial
• Mounting: Surface Mount
• Pin Count: 64
• Package Type: PQFP
• Lead Free Status / Rohs Status: Supplier Unconfirmed

Half carry (H)
This bit is set during ADD and ADC operations to indicate that a carry occurred between bits 3 and 4.
Interrupt (I)
When this bit is set, all maskable interrupts are masked. If an interrupt occurs while this bit is set,
the interrupt is latched and remains pending until the interrupt bit is cleared.
Negative (N)
When set, this bit indicates that the result of the last arithmetic, logical, or data manipulation was
negative.
Zero (Z)
When set, this bit indicates that the result of the last arithmetic, logical, or data manipulation was
zero.
Carry/borrow (C)
When set, this bit indicates that a carry or borrow out of the arithmetic logical unit (ALU) occurred
during the last arithmetic operation. This bit is also affected during bit test and branch instructions
and during shifts and rotates.
11.2
The MCU has a set of 62 basic instructions. They can be grouped into five different types as
follows:
The following paragraphs briefly explain each type. All the instructions within a given type are
presented in individual tables.
This MCU uses all the instructions available in the M146805 CMOS family plus one more: the
unsigned multiply (MUL) instruction. This instruction allows unsigned multiplication of the contents
of the accumulator (A) and the index register (X). The high-order product is then stored in the index
register and the low-order product is stored in the accumulator. A detailed definition of the MUL
instruction is shown in
MC68HC05X16
– Register/memory
– Read/modify/write
– Branch
– Bit manipulation
– Control
Instruction set
Freescale Semiconductor, Inc.
For More Information On This Product,
Table
11-1.
CPU CORE AND INSTRUCTION SET
Go to: www.freescale.com
11-3
11