MC68HC705X32CFU Freescale Semiconductor, MC68HC705X32CFU Datasheet - Page 95

• Manufacturer Part Number: MC68HC705X32CFU
• Manufacturer: Freescale Semiconductor

Specifications of MC68HC705X32CFU

• Cpu Family: HC05
• Device Core Size: 8b
• Frequency (max): 4MHz
• Interface Type: SCI
• Program Memory Type: EPROM
• Program Memory Size: 32KB
• Total Internal Ram Size: 528Byte
• # I/os (max): 32
• Number Of Timers - General Purpose: 1
• Operating Supply Voltage (typ): 5V
• Operating Supply Voltage (max): 5.5V
• Operating Supply Voltage (min): 4.5V
• On-chip Adc: 8-chx8-bit
• Instruction Set Architecture: CISC
• Operating Temp Range: -40C to 85C
• Operating Temperature Classification: Industrial
• Mounting: Surface Mount
• Pin Count: 64
• Package Type: PQFP
• Lead Free Status / Rohs Status: Supplier Unconfirmed

ICF2 — Input capture flag 2
This bit is set when a negative edge is detected by the input capture edge detector 2 at TCAP2;
an input capture interrupt will be generated if ICIE is set. ICF2 is cleared by reading the TSR and
then the input capture low register 2 ($1D).
OCF2 — Output compare flag 2
This bit is set when the output compare 2 register contents match those of the free-running
counter; an output compare interrupt will be generated if OCIE is set. OCF2 is cleared by reading
the TSR and then the output compare 2 low register ($1F).
6.3
‘Input capture’ is a technique whereby an external signal is used to trigger a read of the free
running counter. In this way it is possible to relate the timing of an external signal to the internal
counter value, and hence to elapsed time.
There are two input capture registers: input capture register 1 (ICR1) and input capture register 2 (ICR2).
The same input capture interrupt enable bit (ICIE) is used for the two input captures.
6.3.1
The two 8-bit registers that make up the 16-bit input capture register 1 are read-only, and are used
to latch the value of the free-running counter after the input capture edge detector circuit 1 senses
a valid transition at TCAP1. The level transition that triggers the counter transfer is defined by the
input edge bit (IEDG1). When an input capture 1 occurs, the corresponding flag ICF1 in TSR is set.
An interrupt can also accompany an input capture 1 provided the ICIE bit in TCR is set. The 8 most
significant bits are stored in the input capture high 1 register at $14, the 8 least significant bits in
the input capture low 1 register at $15.
MC68HC05X16
Input capture high 1
1 (set)
0 (clear) –
1 (set)
0 (clear) –
Input capture low 1
Input capture
Input capture register 1 (ICR1)
Freescale Semiconductor, Inc.
–
–
For More Information On This Product,
A valid (negative) input capture has occurred.
No input capture has occurred.
A valid output compare has occurred.
No output compare has occurred.
Address
Go to: www.freescale.com
$0014
$0015
PROGRAMMABLE TIMER
bit 7
bit 6
bit 5
bit 4
bit 3
bit 2
bit 1
bit 0
Undefined
Undefined
on reset
State
6-7
6