PIC32MX360F512L-80I/PT Microchip Technology, PIC32MX360F512L-80I/PT Datasheet - Page 363

• Manufacturer Part Number: PIC32MX360F512L-80I/PT
• Description: IC PIC MCU FLASH 512K 100-TQFP
• Manufacturer: Microchip Technology
• Series: PIC® 32MXr

Specifications of PIC32MX360F512L-80I/PT

• Program Memory Type: FLASH
• Program Memory Size: 512KB (512K x 8)
• Package / Case: 100-TFQFP
• Core Processor: MIPS32® M4K™
• Core Size: 32-Bit
• Speed: 80MHz
• Connectivity: I²C, IrDA, LIN, PMP, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, DMA, POR, PWM, WDT
• Number Of I /o: 85
• Ram Size: 32K x 8
• Voltage - Supply (vcc/vdd): 2.3 V ~ 3.6 V
• Data Converters: A/D 16x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Processor Series: PIC32MX3xx
• Core: MIPS
• Data Bus Width: 32 bit
• Data Ram Size: 32 KB
• Interface Type: I2C , SPI , UART
• Maximum Clock Frequency: 80 MHz
• Number Of Programmable I/os: 85
• Number Of Timers: 5 x 16 bit
• Operating Supply Voltage: 2.3 V to 3.6 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52713-733, 52714-737
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, DM320001, DM320002, MA320001
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit
• Controller Family/series: PIC32
• No. Of I/o's: 85
• Ram Memory Size: 32KB
• Cpu Speed: 80MHz
• No. Of Timers: 6
• Embedded Interface Type: EUART, I2C, PSP, SPI
• No. Of Pwm Channels: 5
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: 876-1000 - PIC32 BREAKOUT BOARDAC244003 - TEST BD MPLAB REAL ICE LOOPBACKAC244006 - KIT MPLAB REAL ICE TRACEDM320001 - KIT EVAL PIC32 STARTERAC164333 - MODULE SKT FOR PM3 100QFP
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

FIGURE 15-3:
15.4
In Edge Detect mode, the input capture module cap-
tures a timer count value on every edge of the capture
input. Edge Detect mode is selected by setting the ICM
bit to ‘001’. In this mode, the capture prescaler is not
used and the capture overflow bit, ICOV (ICxCON<4>)
is not updated. In this mode, the Interrupt Control bits
(ICI, ICxCON<6:5>) are ignored and an interrupt event
is generated for every timer count capture
© 2008 Microchip Technology Inc.
Note: It is recommended that the user disable (i.e.,
Synchronized Capture
Edge Detect (Hall Sensor) Mode
Capture Interrupt
Prescaler Output
clear ON bit, ICxCON<15>) the capture
module before switching to Prescaler Cap-
ture Event mode. Simply switching to Pres-
caler Capture Event mode from another
active mode does not reset the prescaler
and may cause an inadvertent capture
event.
Peripheral Clock
Prescaler Count
Capture Input
Capture Data
Timer Count
PRESCALER CAPTURE EVENT TIMING DIAGRAM
T
1
ICX
_
T
IN
T
ICX
_
PB
H
Advance Information
_
2
IN
_
L
n
3
Figure 15-3 depicts a capture event when the input
capture module is in Prescaler Capture Event mode.
15.5
When the Input Capture module is set for Interrupt
Only mode (ICM = ‘111’) and the device is in Sleep or
Idle mode, the capture input functions as an interrupt
pin. Any rising edge on the capture input triggers an
interrupt. No timer values are captured and the FIFO
buffer is not updated. When the device leaves Sleep or
Idle mode, the interrupt signal is deasserted.
In this mode, since no timer values are captured, the
Timer Select bit ICTMR (ICxCON<7>) is ignored and
there is no need to configure the timer source. A wake-
up interrupt is generated on the first rising edge, there-
fore the Interrupt Control bits ICI (ICxCON<6:5>) are
also ignored. The prescaler is not used in this mode.
n + 1
PIC32MX FAMILY
Interrupt Only Mode
n + 2
4
n + 3
n + 2
DS61143B-page 361
n + 4