PIC32MX360F512L-80I/PT Microchip Technology, PIC32MX360F512L-80I/PT Datasheet - Page 469

• Manufacturer Part Number: PIC32MX360F512L-80I/PT
• Description: IC PIC MCU FLASH 512K 100-TQFP
• Manufacturer: Microchip Technology
• Series: PIC® 32MXr

Specifications of PIC32MX360F512L-80I/PT

• Program Memory Type: FLASH
• Program Memory Size: 512KB (512K x 8)
• Package / Case: 100-TFQFP
• Core Processor: MIPS32® M4K™
• Core Size: 32-Bit
• Speed: 80MHz
• Connectivity: I²C, IrDA, LIN, PMP, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, DMA, POR, PWM, WDT
• Number Of I /o: 85
• Ram Size: 32K x 8
• Voltage - Supply (vcc/vdd): 2.3 V ~ 3.6 V
• Data Converters: A/D 16x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Processor Series: PIC32MX3xx
• Core: MIPS
• Data Bus Width: 32 bit
• Data Ram Size: 32 KB
• Interface Type: I2C , SPI , UART
• Maximum Clock Frequency: 80 MHz
• Number Of Programmable I/os: 85
• Number Of Timers: 5 x 16 bit
• Operating Supply Voltage: 2.3 V to 3.6 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52713-733, 52714-737
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, DM320001, DM320002, MA320001
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit
• Controller Family/series: PIC32
• No. Of I/o's: 85
• Ram Memory Size: 32KB
• Cpu Speed: 80MHz
• No. Of Timers: 6
• Embedded Interface Type: EUART, I2C, PSP, SPI
• No. Of Pwm Channels: 5
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: 876-1000 - PIC32 BREAKOUT BOARDAC244003 - TEST BD MPLAB REAL ICE LOOPBACKAC244006 - KIT MPLAB REAL ICE TRACEDM320001 - KIT EVAL PIC32 STARTERAC164333 - MODULE SKT FOR PM3 100QFP
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

REGISTER 21-1:
© 2008 Microchip Technology Inc.
bit 31
bit 23
bit 15
bit 7
Legend:
R = Readable bit
U = Unimplemented bit
bit 31-26
bit 25-16
bit 15
bit 14
bit 13
bit 12-8
bit 7
bit 6
RTSECSEL
R/W-0
R/W-0
R/W-0
U-0
ON
—
Unimplemented: Read as ‘0’
CAL<9:0>: RTC Drift Calibration bits
Contains a signed 10-bit integer value.
0111111111= Maximum positive adjustment, adds 511 RTC clock pulses every one minute
...
0000000001= Minimum positive adjustment, adds 1 RTC clock pulse every one minute
0000000000= No adjustment
1111111111= Minimum negative adjustment, subtracts 1 RTC clock pulse every one minute
...
1000000000= Minimum negative adjustment, subtracts 512 clock pulses every one minute
ON: RTCC On bit
1 = RTCC module is enabled
0 = RTCC module is disabled
Note: The ON bit is only writable when RTCWREN = 1.
FRZ: Freeze in Debug Mode bit
1 = When emulator is in Debug mode, module freezes operation
0 = When emulator is in Debug mode, module continues operation
Note: The FRZ bit always reads ‘0’ unless in Debug mode.
SIDL: Stop in Idle Mode bit
1 = Disables the PBCLK to the RTCC when CPU enters in Idle mode
0 = Continue normal operation in Idle mode
Unimplemented: Read as ‘0’
RTSECSEL: RTCC Seconds Clock Output Select bit
1 = RTCC seconds clock is selected for the RTCC pin
0 = RTCC alarm pulse is selected for the RTCC pin
Note: Requires RTCOE == 1 (RTCCON<0>) for the output to be active.
RTCCLKON: Status of the RTCC Clock Enable bit
1 = RTCC clock is actively running
0 = RTCC clock is not running
RTCCLKON
R/W-0
R/W-0
FRZ
U-0
R-0
—
RTCCON: RTC CONTROL REGISTER
W = Writable bit
-n = Bit Value at POR: (‘0’, ‘1’, x = Unknown)
R/W-0
R/W-0
SIDL
U-0
U-0
—
—
Advance Information
R/W-0
U-0
U-0
U-0
—
—
—
CAL<7:0>
P = Programmable bit
RTCWREN
R/W-0
R/W-0
U-0
U-0
—
—
(1)
PIC32MX FAMILY
RTCSYNC
R/W-0
U-0
U-0
R-0
—
—
r = Reserved bit
HALFSEC
R/W-0
R/W-0
U-0
R-0
—
CAL<9:8>
DS61143B-page 467
RTCOE
R/W-0
R/W-0
R/W-0
U-0
—
bit 24
bit 16
bit 8
bit 0