PIC32MX360F512L-80I/PT Microchip Technology, PIC32MX360F512L-80I/PT Datasheet - Page 453

• Manufacturer Part Number: PIC32MX360F512L-80I/PT
• Description: IC PIC MCU FLASH 512K 100-TQFP
• Manufacturer: Microchip Technology
• Series: PIC® 32MXr

Specifications of PIC32MX360F512L-80I/PT

• Program Memory Type: FLASH
• Program Memory Size: 512KB (512K x 8)
• Package / Case: 100-TFQFP
• Core Processor: MIPS32® M4K™
• Core Size: 32-Bit
• Speed: 80MHz
• Connectivity: I²C, IrDA, LIN, PMP, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, DMA, POR, PWM, WDT
• Number Of I /o: 85
• Ram Size: 32K x 8
• Voltage - Supply (vcc/vdd): 2.3 V ~ 3.6 V
• Data Converters: A/D 16x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Processor Series: PIC32MX3xx
• Core: MIPS
• Data Bus Width: 32 bit
• Data Ram Size: 32 KB
• Interface Type: I2C , SPI , UART
• Maximum Clock Frequency: 80 MHz
• Number Of Programmable I/os: 85
• Number Of Timers: 5 x 16 bit
• Operating Supply Voltage: 2.3 V to 3.6 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52713-733, 52714-737
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, DM320001, DM320002, MA320001
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit
• Controller Family/series: PIC32
• No. Of I/o's: 85
• Ram Memory Size: 32KB
• Cpu Speed: 80MHz
• No. Of Timers: 6
• Embedded Interface Type: EUART, I2C, PSP, SPI
• No. Of Pwm Channels: 5
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: 876-1000 - PIC32 BREAKOUT BOARDAC244003 - TEST BD MPLAB REAL ICE LOOPBACKAC244006 - KIT MPLAB REAL ICE TRACEDM320001 - KIT EVAL PIC32 STARTERAC164333 - MODULE SKT FOR PM3 100QFP
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

FIGURE 20-3:
20.2.13
In Partial Multiplexed mode, the lower eight address
bits are multiplexed with data pins PMD<7:0>. The
upper eight address bits are unaffected and are
presented on PMA<15:8>. Note, PMA15 is not
available if PMCS2 is enabled and PMA14 is not
available if PMCS1 is enabled. The PMA<0> pin is
used as an Address Latch, and presents the Address
Latch Low enable strobe (PMALL). PMA<7:1> are
available as general purpose I/O pins. Partial
Multiplexed mode is selected by configuring bits
ADRMUX<1:0> = 00.
FIGURE 20-4:
© 2008 Microchip Technology Inc.
ADRMUX<1:0> =
Address Bus
Multiplexed Address/Data Bus
Data Bus
Control Lines
Note 1: PMA15 is not available if PMCS2 is enabled.
Address Bus
Data Bus
Control Lines
ADRMUX<1:0> =
Note 1: PMA15 is not available if PMCS2 is enabled.
PIC32MX
PIC32MX
PMA14 is not available if PMCS1 is enabled.
PMA14 is not available if PMCS1 is enabled.
PARTIAL MULTIPLEXED MODE
01
00
DEMULTIPLEXED
ADDRESSING
PARTIAL MULTIPLEXED
ADDRESSING
PMD<7:0>
PMA<13:8>
PMD<15:8>
PMA14/PMCS1
PMA15/PMCS2
PMA0 / PMALL
PMRD
PMWR
PMA<13:0>
PMD<7:0>
PMD<15:8>
PMA14/PMCS1
PMA15/PMCS2
PMRD
PMWR
Advance Information
(1)
(1)
20.2.14
In 8-Bit Full Multiplexed mode, the entire 16 bits of the
address are multiplexed with the data pins on
PMD<7:0>. The PMA<0> and PMA<1> pins are used
to present Address Latch Low enable (PMALL) and
Address
respectively. Pins PMA<13:2> are not used as address
pins and can be used as general purpose I/O pins. In
the event address bits PMA15 or PMA14 are
configured as chip selects, the corresponding address
bits
automatically forced = 0. Full 8-Bit Multiplexed mode is
selected
(PMCON<12:11>) = 10.
FIGURE 20-5:
20.2.15
In Full 16-Bit Multiplexed mode, the entire 16 bits of the
address are multiplexed with the data pins on
PMD<15:0>.
Address Latch Low enable PMALL and Address Latch
High enable PMALH strobes, respectively, and at the
same time. Pins PMA<13:2> are not used as address
pins and can be used as general purpose I/O pins. In
the event address bits PMA15 or PMA14 are config-
ured as chip selects, the corresponding address bits
PMADDR<15> and PMADDR<14> are automatically
forced = 0. Full 16-Bit Multiplexed mode is selected by
configuring bits:
ADRMUX<1:0>(PMCON<12:11>) = 11
ADRMUX<1:0> =
Fully Multiplexed Address/Data Bus
Control Lines
Note 1: PMA15 is not available if PMCS2 is enabled.
PIC32MX
PMADDR<15>
PMA14 is not available if PMCS1 is enabled.
PIC32MX FAMILY
Latch
FULL MULTIPLEXED MODE (8-BIT
DATA PINS)
by
FULL MULTIPLEXED MODE (16-BIT
DATA PINS)
10
Pins PMA<0> and PMA<1> provide
configuring
High
FULL MULTIPLEXED
ADDRESSING
(8-BIT BUS)
and
enable
bits
PMADDR<14>
PMD<7:0>
PMA14/PMCS1
PMA15/PMCS2
PMA1 / PMALH
PMRD
PMWR
PMA0 / PMALL
DS61143B-page 451
PMALH
ADRMUX<1:0>
strobes,
(1)
are