PIC32MX360F512L-80I/PT Microchip Technology, PIC32MX360F512L-80I/PT Datasheet - Page 570

• Manufacturer Part Number: PIC32MX360F512L-80I/PT
• Description: IC PIC MCU FLASH 512K 100-TQFP
• Manufacturer: Microchip Technology
• Series: PIC® 32MXr

Specifications of PIC32MX360F512L-80I/PT

• Program Memory Type: FLASH
• Program Memory Size: 512KB (512K x 8)
• Package / Case: 100-TFQFP
• Core Processor: MIPS32® M4K™
• Core Size: 32-Bit
• Speed: 80MHz
• Connectivity: I²C, IrDA, LIN, PMP, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, DMA, POR, PWM, WDT
• Number Of I /o: 85
• Ram Size: 32K x 8
• Voltage - Supply (vcc/vdd): 2.3 V ~ 3.6 V
• Data Converters: A/D 16x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Processor Series: PIC32MX3xx
• Core: MIPS
• Data Bus Width: 32 bit
• Data Ram Size: 32 KB
• Interface Type: I2C , SPI , UART
• Maximum Clock Frequency: 80 MHz
• Number Of Programmable I/os: 85
• Number Of Timers: 5 x 16 bit
• Operating Supply Voltage: 2.3 V to 3.6 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52713-733, 52714-737
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, DM320001, DM320002, MA320001
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit
• Controller Family/series: PIC32
• No. Of I/o's: 85
• Ram Memory Size: 32KB
• Cpu Speed: 80MHz
• No. Of Timers: 6
• Embedded Interface Type: EUART, I2C, PSP, SPI
• No. Of Pwm Channels: 5
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: 876-1000 - PIC32 BREAKOUT BOARDAC244003 - TEST BD MPLAB REAL ICE LOOPBACKAC244006 - KIT MPLAB REAL ICE TRACEDM320001 - KIT EVAL PIC32 STARTERAC164333 - MODULE SKT FOR PM3 100QFP
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

operation after any power-down, including Sleep mode.
PIC32MX FAMILY
27.4
All PIC32MX Family device’s core and digital logic are
designed to operate at a nominal 1.8V. To simplify sys-
tem designs, most devices in the PIC32MX Family
incorporate an on-chip regulator providing the required
core logic voltage from V
The internal 1.8V regulator is controlled by the
ENVREG pin. Tying this pin to V
lator, which in turn provides power to the core. A low
ESR capacitor (such as tantalum) must be connected
to the V
maintain the stability of the regulator. The recom-
mended value for the filer capacitor is provided in
Section 30.1 “DC Characteristics”.
Tying the ENVREG pin to V
this case, separate power for the core logic at a nomi-
nal 1.8V must be supplied to the device on the
V
Alternatively, the V
tied together to operate at a lower nominal voltage.
Refer to Figure 27-1 for possible configurations.
27.4.1
When the voltage regulator is enabled, it takes approxi-
mately 10 μs for it to generate output. During this time,
designated as T
T
If the regulator is disabled, a separate Power-up Timer
(PWRT) is automatically enabled. The PWRT adds a
fixed delay of 64 ms nominal delay at device start-up.
27.4.2
When the on-chip regulator is enabled, PIC32MX Fam-
ily devices also have a simple brown-out capability. If
the voltage supplied to the regulator is inadequate to
maintain a regulated level, the regulator Reset circuitry
will generate a Brown-out Reset. This event is captured
by the BOR flag bit (RCON<1>). The brown-out voltage
levels are specific in Section 30.1 “DC Characteris-
tics”.
27.4.3
The on-chip regulator is designed to meet the power-up
requirements for the device. If the application does not
use the regulator, then strict power-up conditions must
be adhered to. While powering up, V
never exceed V
DS61143B-page 568
STARTUP
DDCORE
DDCORE
On-Chip Voltage Regulator
/V
is applied every time the device resumes
CAP
ON-CHIP REGULATOR AND POR
ON-CHIP REGULATOR AND BOR
POWER-UP REQUIREMENTS
pin.
DD
/V
STARTUP
CAP
DDCORE
by 0.3 volts.
pin (Figure 27-1). This helps to
, code execution is disabled.
DD
/V
SS
.
CAP
disables the regulator. In
DD
and V
enables the regu-
DD
DDCORE
pins can be
Advance Information
must
FIGURE 27-1:
Note 1:
Regulator Enabled (ENVREG tied to V
Regulator Disabled (ENVREG tied to ground):
(10 μF typ)
C
1.8V
EFC
These are typical operating voltages. Refer
to Section 30.1 “DC Characteristics” for
the full operating ranges of V
V
(1)
DDCORE
3.3V
3.3V
.
CONNECTIONS FOR THE
ON-CHIP REGULATOR
(1)
© 2008 Microchip Technology Inc.
V
ENVREG
V
V
DD
DDCORE
SS
PIC32MX
V
ENVREG
V
V
DD
DDCORE
SS
PIC32MX
/V
CAP
/V
CAP
DD
and
DD
):