PIC32MX360F512L-80I/PT Microchip Technology, PIC32MX360F512L-80I/PT Datasheet - Page 71

• Manufacturer Part Number: PIC32MX360F512L-80I/PT
• Description: IC PIC MCU FLASH 512K 100-TQFP
• Manufacturer: Microchip Technology
• Series: PIC® 32MXr

Specifications of PIC32MX360F512L-80I/PT

• Program Memory Type: FLASH
• Program Memory Size: 512KB (512K x 8)
• Package / Case: 100-TFQFP
• Core Processor: MIPS32® M4K™
• Core Size: 32-Bit
• Speed: 80MHz
• Connectivity: I²C, IrDA, LIN, PMP, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, DMA, POR, PWM, WDT
• Number Of I /o: 85
• Ram Size: 32K x 8
• Voltage - Supply (vcc/vdd): 2.3 V ~ 3.6 V
• Data Converters: A/D 16x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Processor Series: PIC32MX3xx
• Core: MIPS
• Data Bus Width: 32 bit
• Data Ram Size: 32 KB
• Interface Type: I2C , SPI , UART
• Maximum Clock Frequency: 80 MHz
• Number Of Programmable I/os: 85
• Number Of Timers: 5 x 16 bit
• Operating Supply Voltage: 2.3 V to 3.6 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52713-733, 52714-737
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, DM320001, DM320002, MA320001
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit
• Controller Family/series: PIC32
• No. Of I/o's: 85
• Ram Memory Size: 32KB
• Cpu Speed: 80MHz
• No. Of Timers: 6
• Embedded Interface Type: EUART, I2C, PSP, SPI
• No. Of Pwm Channels: 5
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: 876-1000 - PIC32 BREAKOUT BOARDAC244003 - TEST BD MPLAB REAL ICE LOOPBACKAC244006 - KIT MPLAB REAL ICE TRACEDM320001 - KIT EVAL PIC32 STARTERAC164333 - MODULE SKT FOR PM3 100QFP
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

FIGURE 4-2:
FIGURE 4-3:
FIGURE 4-4:
© 2008 Microchip Technology Inc.
Clock from
Ext. System
Clock from
Ext. System
PBCLK
I/O
CRYSTAL OR CERAMIC RESONATOR OPERATION (XT, XTPLL, HS, OR HSPLL
OSCILLATOR MODE)
EXTERNAL CLOCK INPUT
OPERATION WITH
CLOCK-OUT (EC, ECPLL
MODE)
EXTERNAL CLOCK INPUT
OPERATION WITH NO
CLOCK-OUT (EC, ECPLL
MODE)
OSCI
OSCO (Clock Out)
OSCI
I/O (OSCO)
Note 1:
2:
3:
PIC32MX
PIC32MX
A series resistor, Rs, may be required for AT strip cut crystals.
The internal feedback resistor, R
Refer to the “PIC32MX Family Reference Manual” (DS61132) for help determining
the best oscillator components.
Advance Information
C1
C2
(3)
(3)
XTAL
R
S
OSCO
(1)
OSCI
4.2.1.2
To configure the POSC the following steps should be
performed:
1.
2.
3.
R
Select POSC as the default oscillator in the
device Configuration register, DEVCFG1, by
setting FNOSC<2:0> = ‘010’ without PLL or
‘011’ with PLL.
Select the desired mode HS, XT, or EC, using
POSCMD<1:0> in DEVCFG1.
If the PLL is to be used:
a)Select the appropriate Configuration bits for
b)Select the desired PLL multiplier ratio using
c)At runtime, select the desired PLL output
F
F
, is typically in the range of 2 to 10 MΩ.
the PLL input divider to scale the input
frequency to be between 4 MHz and 5 MHz
using FPLLIDIV<2:0> in DEVCFG2.
FPLLMULT<2:0>) in DEVCFG2.
divider using PLLODIV (OSCCON<29:27>) to
provide the desired clock frequency. The
default value is set by DEVCFG1.
(2)
PIC32MX FAMILY
Primary Oscillator (POSC)
Configuration
Enable
PIC32MX
To Internal Logic
DS61143B-page 69