AT32UC3B1128-AUT Atmel, AT32UC3B1128-AUT Datasheet - Page 264

• Manufacturer Part Number: AT32UC3B1128-AUT
• Description: IC MCU AVR32 128KB FLASH 48-TQFP
• Manufacturer: Atmel
• Series: AVR®32 UC3r

Specifications of AT32UC3B1128-AUT

• Core Processor: AVR
• Core Size: 32-Bit
• Speed: 60MHz
• Connectivity: I²C, IrDA, SPI, SSC, UART/USART, USB
• Peripherals: Brown-out Detect/Reset, DMA, POR, PWM, WDT
• Number Of I /o: 28
• Program Memory Size: 128KB (128K x 8)
• Program Memory Type: FLASH
• Ram Size: 32K x 8
• Voltage - Supply (vcc/vdd): 1.65 V ~ 1.95 V
• Data Converters: A/D 6x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 48-TQFP, 48-VQFP
• Package: 48TQFP
• Device Core: AVR32
• Family Name: AT32
• Maximum Speed: 60 MHz
• Operating Supply Voltage: 1.8|3.3 V
• Data Bus Width: 32 Bit
• Number Of Programmable I/os: 28
• Interface Type: I2S/SPI/TWI/USART/USB
• On-chip Adc: 6-chx10-bit
• Number Of Timers: 3
• For Use With: ATSTK600-TQFP48 - STK600 SOCKET/ADAPTER 48-TQFPATAVRONEKIT - KIT AVR/AVR32 DEBUGGER/PROGRMMR770-1008 - ISP 4PORT ATMEL AVR32 MCU SPIATEVK1101 - KIT DEV/EVAL FOR AVR32 AT32UC3B
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

20.7.1.3
32059K–03/2011
Receiver clock management
be inverted independently by writing a one to the Transmit Clock Inversion bit in TCMR
(TCMR.CKI).
The transmitter can also drive the TX_CLOCK pin continuously or be limited to the actual data
transfer, depending on the Transmit Clock Output Mode Selection field in the TCMR register
(TCMR.CKO). The TCMR.CKI bit has no effect on the clock outputs.
Writing 0b10 to the TCMR.CKS field to select TX_CLOCK pin and 0b001 to the TCMR.CKO field
to select Continuous Transmit Clock can lead to unpredictable results.
Figure 20-6. Transmitter Clock Management
The receiver clock is generated from the transmitter clock, the divider clock, or an external clock
scanned on the RX_CLOCK pin. The receive clock is selected by writing to the Receive Clock
Selection field in the Receive Clock Mode Register (RCMR.CKS). The receive clock can be
inverted independently by writing a one to the Receive Clock Inversion bit in RCMR
(RCMR.CKI).
The receiver can also drive the RX_CLOCK pin continuously or be limited to the actual data
transfer, depending on the Receive Clock Output Mode Selection field in the RCMR register
(RCMR.CKO). The RCMR.CKI bit has no effect on the clock outputs.
Writing 0b10 to the RCMR.CKS field to select RX_CLOCK pin and 0b001 to the RCMR.CKO
field to select Continuous Receive Clock can lead to unpredictable results.
TX_CLOCK
Receiver
Divider
Clock
Clock
CKS
MUX
CKO
Controller
Tri-state
MUX
CKI
INV
Data Transfer
Controller
Tri-state
CKG
AT32UC3B
Transmitter
Output
Clock
Clock
264