ATMEGA16HVA-4CKU Atmel, ATMEGA16HVA-4CKU Datasheet - Page 109

• Manufacturer Part Number: ATMEGA16HVA-4CKU
• Description: MCU AVR 16K FLASH 4MHZ 36-LGA
• Manufacturer: Atmel
• Series: AVR® ATmegar

Specifications of ATMEGA16HVA-4CKU

• Core Processor: AVR
• Core Size: 8-Bit
• Speed: 4MHz
• Connectivity: SPI
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 7
• Program Memory Size: 16KB (8K x 16)
• Program Memory Type: FLASH
• Eeprom Size: 256 x 8
• Ram Size: 512 x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 9 V
• Data Converters: A/D 5x12b
• Oscillator Type: External
• Operating Temperature: -20°C ~ 85°C
• Package / Case: 36-LGA
• Processor Series: ATMEGA16x
• Core: AVR8
• Data Bus Width: 8 bit
• Data Ram Size: 512 B
• Interface Type: SPI
• Maximum Clock Frequency: 4 MHz
• Number Of Programmable I/os: 6
• Number Of Timers: 2
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: EWAVR, EWAVR-BL
• Development Tools By Supplier: ATAVRDRAGON, ATSTK500, ATSTK600, ATAVRISP2, ATAVRONEKIT, ATAVRSB200, ATAVRSB201
• Minimum Operating Temperature: - 20 C
• On-chip Adc: 12 bit, 5 Channel
• For Use With: ATSTK600 - DEV KIT FOR AVR/AVR32ATSTK500 - PROGRAMMER AVR STARTER KIT
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

19.7.2
8024A–AVR–04/08
CADCSRB - CC-ADC Control and Status Register B
• Bits 7 - Res: Reserved
This bit is reserved bit and will always read as zero.
• Bit 6 - CADACIE: CC-ADC Accumulate Current Interrupt Enable
When the CADACIE bit is set (one), and the I-bit in the Status Register is set (one), the CC-ADC
Accumulate Current Interrupt is enabled.
• Bit 5 - CADRCIE: CC-ADC Regular Current Interrupt Enable
When the CADRCIE bit is set (one), and the I-bit in the Status Register is set (one), the CC-ADC
Regular Current Interrupt is enabled.
• Bit 4 - CADICIE: CC-ADC Instantaneous Current Interrupt Enable
When the CADICIE bit is set (one), and the I-bit in the Status Register is set (one), the CC-ADC
Instantaneous Current Interrupt is enabled.
• Bits 3 - Res: Reserved
This bit is reserved bit and will always read as zero.
• Bit 2 - CADACIF: CC-ADC Accumulate Current Interrupt Flag
The CADACIF bit is set (one) after the Accumulate Current conversion has completed. The
CCADC Accumulate Current Interrupt is executed if the CADACIE bit and the I-bit in SREG are
set (one). CADACIF is cleared by hardware when executing the corresponding Interrupt Han-
dling Vector. Alternatively, CADACIF is cleared by writing a logic one to the flag.
• Bit 1 - CADRCIF: CC-ADC Regular Current Interrupt Flag
The CADRCIF bit is set (one) when the absolute value of the result of the last CC-ADC conver-
sion is greater than, or equal to, the compare values set by the CC-ADC Regular Current Level
Register.
• Bit 0 - CADICIF: CC-ADC Instantaneous Current Interrupt Flag
The CADICIF bit is set (one) when a CC-ADC Instantaneous Current conversion is completed.
The CC-ADC Instantaneous Current Interrupt is executed if the CADICIE bit and the I-bit in
SREG are set (one). CADICIF is cleared by hardware when executing the corresponding Inter-
rupt Handling vector. Alternatively, CADICIF is cleared by writing a logic one to the flag.
Bit
(0xE5)
Read/Write
Initial Value
R
7
0
–
CADACIE
R/W
6
0
CADRCIE
R
5
0
CADICIE
R/W
4
0
R
3
0
–
ATmega8HVA/16HVA
CADACIF
R/W
2
0
CADRCIF
R/W
1
0
CADICIF
R/W
0
0
CADCSRB
109