ATMEGA16HVA-4CKU Atmel, ATMEGA16HVA-4CKU Datasheet - Page 92

• Manufacturer Part Number: ATMEGA16HVA-4CKU
• Description: MCU AVR 16K FLASH 4MHZ 36-LGA
• Manufacturer: Atmel
• Series: AVR® ATmegar

Specifications of ATMEGA16HVA-4CKU

• Core Processor: AVR
• Core Size: 8-Bit
• Speed: 4MHz
• Connectivity: SPI
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 7
• Program Memory Size: 16KB (8K x 16)
• Program Memory Type: FLASH
• Eeprom Size: 256 x 8
• Ram Size: 512 x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 9 V
• Data Converters: A/D 5x12b
• Oscillator Type: External
• Operating Temperature: -20°C ~ 85°C
• Package / Case: 36-LGA
• Processor Series: ATMEGA16x
• Core: AVR8
• Data Bus Width: 8 bit
• Data Ram Size: 512 B
• Interface Type: SPI
• Maximum Clock Frequency: 4 MHz
• Number Of Programmable I/os: 6
• Number Of Timers: 2
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: EWAVR, EWAVR-BL
• Development Tools By Supplier: ATAVRDRAGON, ATSTK500, ATSTK600, ATAVRISP2, ATAVRONEKIT, ATAVRSB200, ATAVRSB201
• Minimum Operating Temperature: - 20 C
• On-chip Adc: 12 bit, 5 Channel
• For Use With: ATSTK600 - DEV KIT FOR AVR/AVR32ATSTK500 - PROGRAMMER AVR STARTER KIT
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

17.10.5
17.10.6
92
ATmega8HVA/16HVA
OCRnB – Timer/Counter n Output Compare Register B
TIMSKn – Timer/Counter n Interrupt Mask Register
The Output Compare Register B contains an 8-bit value that is continuously compared with the
counter value (TCNTnL in 8-bit mode and TCNTnH in 16-bit mode). A match can be used to
generate an Output Compare interrupt.
In 16-bit mode the OCRnB register contains the high byte of the 16-bit Output Compare Regis-
ter. To ensure that both the high and the low bytes are written simultaneously when the CPU
writes to these registers, the access is performed using an 8-bit temporary high byte register
(TEMP). This temporary register is shared by all the other 16-bit registers. See
isters in 16-bit Mode” on page
Note that the OCRnB is not writable in Input Capture mode.
• Bit 3 – ICIEn: Timer/Counter n Input Capture Interrupt Enable
When this bit is written to one, and the I-flag in the Status Register is set (interrupts globally
enabled), the Timer/Counter n Input Capture interrupt is enabled. The corresponding Interrupt
Vector
• Bit 2 – OCIEnB: Timer/Counter n Output Compare Match B Interrupt Enable
When the OCIEnB bit is written to one, and the I-bit in the Status Register is set, the
Timer/Counter Compare Match B interrupt is enabled. The corresponding interrupt is executed if
a Compare Match in Timer/Counter occurs, i.e., when the OCFnB bit is set in the
Timer/Counter n Interrupt Flag Register” on page
• Bit 1 – OCIEnA: Timer/Counter n Output Compare Match A Interrupt Enable
When the OCIEnA bit is written to one, and the I-bit in the Status Register is set, the
Timer/Counter n Compare Match A interrupt is enabled. The corresponding interrupt is executed
if a Compare Match in Timer/Counter n occurs, i.e., when the OCFnA bit is set in the
Timer/Counter n Interrupt Flag Register” on page
• Bit 0 – TOIEn: Timer/Counter n Overflow Interrupt Enable
When the TOIEn bit is written to one, and the I-bit in the Status Register is set, the
Timer/Counter n Overflow interrupt is enabled. The corresponding interrupt is executed if an
overflow in Timer/Counter n occurs, i.e., when the TOVn bit is set in the
n Interrupt Flag Register” on page
Bit
Read/Write
Initial Value
Bit
Read/Write
Initial Value
(See Section “12.” on page
R/W
7
0
7
R
0
-
R/W
R
6
0
6
0
-
86.
R/W
93.
52.) is executed when the ICFn flag, located in TIFRn, is set.
R
5
0
5
0
-
R/W
R
4
0
4
0
-
OCRnB[7:0]
93.
93.
ICIEn
R/W
R/W
3
0
3
0
OCIEnB
R/W
R/W
2
0
2
0
OCIEnA
R/W
R/W
1
0
”TIFRn – Timer/Counter
1
0
”Accessing Reg-
TOIEn
R/W
R
0
0
0
0
8024A–AVR–04/08
”TIFRn –
”TIFRn –
OCRnB
TIMSKn