ATMEGA16HVA-4CKU Atmel, ATMEGA16HVA-4CKU Datasheet - Page 93

• Manufacturer Part Number: ATMEGA16HVA-4CKU
• Description: MCU AVR 16K FLASH 4MHZ 36-LGA
• Manufacturer: Atmel
• Series: AVR® ATmegar

Specifications of ATMEGA16HVA-4CKU

• Core Processor: AVR
• Core Size: 8-Bit
• Speed: 4MHz
• Connectivity: SPI
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 7
• Program Memory Size: 16KB (8K x 16)
• Program Memory Type: FLASH
• Eeprom Size: 256 x 8
• Ram Size: 512 x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 9 V
• Data Converters: A/D 5x12b
• Oscillator Type: External
• Operating Temperature: -20°C ~ 85°C
• Package / Case: 36-LGA
• Processor Series: ATMEGA16x
• Core: AVR8
• Data Bus Width: 8 bit
• Data Ram Size: 512 B
• Interface Type: SPI
• Maximum Clock Frequency: 4 MHz
• Number Of Programmable I/os: 6
• Number Of Timers: 2
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: EWAVR, EWAVR-BL
• Development Tools By Supplier: ATAVRDRAGON, ATSTK500, ATSTK600, ATAVRISP2, ATAVRONEKIT, ATAVRSB200, ATAVRSB201
• Minimum Operating Temperature: - 20 C
• On-chip Adc: 12 bit, 5 Channel
• For Use With: ATSTK600 - DEV KIT FOR AVR/AVR32ATSTK500 - PROGRAMMER AVR STARTER KIT
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

17.10.7
8024A–AVR–04/08
TIFRn – Timer/Counter n Interrupt Flag Register
• Bits 3 – ICFn: Timer/Counter n Input Capture Flag
This flag is set when a capture event occurs, according to the setting of ICENn, ICESn and ICSn
bits in the TCCRnA Register.
ICFn is automatically cleared when the Input Capture Interrupt Vector is executed. Alternatively,
ICFn can be cleared by writing a logic one to its bit location.
• Bit 2 – OCFnB: Output Compare Flag n B
The OCFnB bit is set when a Compare Match occurs between the Timer/Counter and the data in
OCRnB – Output Compare Register n B. OCFnB is cleared by hardware when executing the
corresponding interrupt handling vector. Alternatively, OCFnB is cleared by writing a logic one to
the flag. When the I-bit in SREG, OCIEnB (Timer/Counter Compare B Match Interrupt Enable),
and OCFnB are set, the Timer/Counter Compare Match Interrupt is executed.
The OCFnB is not set in 16-bit Output Compare mode when the Output Compare Register
OCRnB is used as the high byte of the 16-bit Output Compare Register or in 16-bit Input Cap-
ture mode when the Output Compare Register OCRnB is used as the high byte of the Input
Capture Register.
• Bit 1– OCFnA: Output Compare Flag n A
The OCFnA bit is set when a Compare Match occurs between the Timer/Counter n and the data
in OCRnA – Output Compare Register n. OCFnA is cleared by hardware when executing the
corresponding interrupt handling vector. Alternatively, OCFnA is cleared by writing a logic one to
the flag. When the I-bit in SREG, OCIEnA (Timer/Counter n Compare Match Interrupt Enable),
and OCFnA are set, the Timer/Counter n Compare Match Interrupt is executed.
The OCFnA is also set in 16-bit mode when a Compare Match occurs between the
Timer/Counter n and 16-bit data in OCRnB/A. The OCFnA is not set in Input Capture mode
when the Output Compare Register OCRnA is used as an Input Capture Register.
• Bit 0 – TOVn: Timer/Counter n Overflow Flag
The bit TOVn is set when an overflow occurs in Timer/Counter n. TOVn is cleared by hardware
when executing the corresponding interrupt handling vector. Alternatively, TOVn is cleared by
writing a logic one to the flag. When the SREG I-bit, TOIEn (Timer/Counter n Overflow Interrupt
Enable), and TOVn are set, the Timer/Counter n Overflow interrupt is executed.
Bit
Read/Write
Initial Value
R
7
0
-
R
6
0
-
R
5
0
-
R
4
0
-
ICFn
R/W
3
0
ATmega8HVA/16HVA
OCFnB
R/W
2
0
OCFnA
R/W
1
0
TOVn
R/W
0
0
TIFRn
93