R88A-CAU015S Omron, R88A-CAU015S Datasheet - Page 4

• Manufacturer Part Number: R88A-CAU015S
• Description: POWER CABLE 15M
• Manufacturer: Omron

Specifications of R88A-CAU015S

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

General Precautions
!
!
!
!
!
!
!
!
!
!
!
WARNING
WARNING
WARNING
WARNING
WARNING
WARNING
WARNING
WARNING
Caution
Caution
Caution
Observe the following precautions when using the OMNUC Position Drivers and peripheral
devices.
This manual may include illustrations of the product with protective covers removed in order
to describe the components of the product in detail. Make sure that these protective covers
are on the product before use.
Consult your OMRON representative when using the product after a long period of storage.
Do not touch the inside of the Servo Driver. Doing so may result in electric shock.
Always connect the frame ground terminals of the Servo Driver and the Servomotor
to a class-3 ground (to 100
in electric shock.
Do not remove the front cover, terminal covers, cables, Parameter Units, or optional
items while the power is being supplied. Doing so may result in electric shock.
Operation, maintenance, or inspection must be performed by authorized personnel.
Not doing so may result in operation stoppage, burning of the product, electric
shock, or injury.
Wiring or inspection must be performed at least 1 minute after turning off the power
supply. Doing so may result in electric shock.
Do not damage, pull on, apply stress to, place heavy objects on, or pinch the cables.
Doing so may result in electric shock.
Do not touch the rotating parts of the Servomotor under operation. Doing so may
result in injury.
Do not modify the product. Doing so may result in injury or damage to the product.
Use the Servomotors and Servo Drivers in a specified combination. Not doing so
may result in fire or damage to the products.
Do not store or install the product in the following places. Doing so may result in elec-
tric shock, fire or damage to the product.
Do not touch the Servo Driver radiator, regenerative resistor, or Servomotor while
the power is being supplied or soon after the power is turned off. Doing so may result
in a skin burn due to the hot surface.
Locations subject to direct sunlight.
Locations subject to temperatures or humidity outside the range specified in the
specifications.
Locations subject to condensation as the result of severe changes in temperature.
Locations subject to corrosive or flammable gases.
Locations subject to dust (especially iron dust) or salts.
Locations subject to shock or vibration.
Locations subject to exposure to water, oil, or chemicals.
or less). Not connecting to a class-3 ground may result