TMPM333FDFG Toshiba, TMPM333FDFG Datasheet - Page 409

• Manufacturer Part Number: TMPM333FDFG
• Description: Microcontrollers (MCU) MCU w/ ARM Cortex-M3 512K FLASH, 32K SRAM
• Manufacturer: Toshiba

Specifications of TMPM333FDFG

• Processor Series: TX03
• Core: ARM Cortex M3
• 3rd Party Development Tools: MDK-ARM, RL-ARM, ULINK2
• Product Summaries: Summary
• Lead Free: Yes
• Rohs Compatible Product(s): Available
• Rom (kbytes): 512K
• Rom Type: Flash
• Ram (kbytes): 32K
• Number Of Pins: 100
• Package: LQFP(14×14)
• Vcc: 3V
• Cpu Mhz: 40
• Ssp (ch) Spi: -
• I2c/sio (ch): 3
• Uart/sio (ch): 3
• Usb: -
• Can: -
• Ethernet: -
• External Bus Interface: -
• Cs/wait Controller (ch): -
• Dma Controller: -
• 10-bit Da Converter: -
• 10-bit Ad Converter: 12
• 12-bit Ad Converter: -
• 16-bit Timer / Counter: 10
• Motor / Igbt Control: -
• Real Time Clock: 1
• Watchdog Timer: Y
• Osc Freq Detect: -
• Clock Gear: Y
• Low-power Hold Function: -
• Remote Control Interface: -
• Hardware Cec Controller: -
• Comparators: -
• Low-voltage Detector: -
• Etm Hardware Trace: 4-bit
• Lead Free Status / Rohs Status: Details

Table 15-8 Transfer Format for the Show Product Information Command
83 byte
84 byte
to
87 byte
88 byte
to
91 byte
92 byte
93 byte
94 byte
Byte
Note 1: In I/O Interface mode, the baud rate for the transfers of the first and second bytes must be 1/16 of the desired
Note 2: In case of any negative acknowledge, the boot program returns to a state in which it waits for a command code
Note 3: FD/ FY/ FW in the above table denotes the TMPM333FDFG, TMPM333FYFG and TMPM333FWFG respectively.
Note 4: The RAM actual end address of the TMPM333FYFG is 0x2000_3FFF.
Note 5: The flash memory actual end address of the TMPM333FYFG is 0x3F83_FFFF. In addition to 256KB flash area,
Note 6: The actual number of the TMPM333FYFG flash blocks is one.
baud rate.
(3rd byte). In I/O Interface mode, if a communication error occurs, a negative acknowledge does not occur.
the TMPM333FYFG provides 128-word data/ password area (0x3F87_FF00 to 0x3F87_FF80, 1 page) for Show
Product Information command.
−
−
−
−
−
(Wait for the next command code.)
to the TMPM333FDFG/FYFG/FWFG
Data Transferred from the Controller
Page 389
Baud rate
Number of flash blocks of the same size (64K)
(1 byte)
0x01 (FD/FY/FW)
Start address of a group of the same-size (128K) flash
blocks (4 bytes)
From 84th byte:
0x00, 0x00, 0x82, 0x3F (FD/FY)
0x00, 0x00, 0x00, 0x00 (FW)
Size (in halfwords) of the same-size (128K) flash
blocks (4 bytes)
From 88th byte:
0x00, 0x00, 0x01, 0x00 (FD/FY/FW)
Number of flash blocks of the same size (128K)
(1 byte)
0x03 (FD/FY) (Note 6)
0x00 (FW)
Checksum value for bytes 5 ~ 92
−
Data Transferred from the TMPM333FDFG/FYFG/
TMPM333FDFG/FYFG/FWFG
FWFG to the Controller