TMP86xy48UG/FG Toshiba, TMP86xy48UG/FG Datasheet - Page 175

• Manufacturer Part Number: TMP86xy48UG/FG
• Manufacturer: Toshiba

Specifications of TMP86xy48UG/FG

• Package: LQFP64/QFP64
• Rom Types (m=mask,p=otp,f=flash): F/E
• Rom Size: 32
• Ram Size: 2K
• Driver Led: 11
• Driver Lcd: -
• Spi/sio Channels: 1
• Uart/sio Channels: 1
• I2c/sio Channels: 1
• High-speed Serial Output: 2
• Adc 8-bit Channels: -
• Adc 10-bit Channels: 16
• Da Converter Channels: -
• Timer Counter 18-bit Channel: -
• Timer Counter 16-bit Channel: 2
• Timer Counter 8-bit Channel: 2
• Motor Channels: -
• Watchdog Timer: Y
• Dual Clock: Y
• Clock Gear: -
• Number Of I/o Ports: 54
• Power Supply (v): 2.7 to 3.6

2.18 FLASH Program Memory
2.18.1
2.18.2
2.18.3
2.18.4
2.18.5
2.18.6
data memory of FLASH is not in use, the TMP86FM48 can be used as an FLASH product with
32768 full bytes. To write data to the program memory (Data memory of FLASH), execute the
serial PROM mode.
The TMP86FM48 incorporates 32256 bytes (8200H to FFFFH) of program memory. If the
Configuration
Section 2.17.1 “Configuration”.
Control
See Section 2.17.2 “Control”.
FLASH Write Enable Control (EEPCR<EEPMD>)
manner as for the data memory of FLASH. See Section 2.17.3 “FLASH Write Enable
Control (EEPCR<EEPMD>)”.
FLASH Write Forcible Stop (EEPCR<EEPRS>)
manner as for the data memory of FLASH. See Section 2.17.4 “FLASH Write Forcible Stop
(EEPCR<EEPRS>)”.
Power Control for the FLASH Control Circuit
for the data memory of FLASH. See Section 2.17.5 “Power Control for the FLASH Control
Circuit”.
Accessing the FLASH Program Memory Area
after the serial PROM mode is entered. For explanations about what control is performed
in the serial PROM mode, see the following descriptions.
The program memory has the same configuration as for the data memory of FLASH. See
The program memory is controlled in the same manner as for the data memory of FLASH.
The FLASH write enable control register for the program memory behaves in the same
The FLASH write forcible stop register for the program memory behaves in the same
The power for the program memory control circuit is controlled in the same manner as
Basically, a write to the program memory area is carried out using UART communication
86FM48-171
TMP86FM48
2007-08-24