TMP86xy48UG/FG Toshiba, TMP86xy48UG/FG Datasheet - Page 180

• Manufacturer Part Number: TMP86xy48UG/FG
• Manufacturer: Toshiba

Specifications of TMP86xy48UG/FG

• Package: LQFP64/QFP64
• Rom Types (m=mask,p=otp,f=flash): F/E
• Rom Size: 32
• Ram Size: 2K
• Driver Led: 11
• Driver Lcd: -
• Spi/sio Channels: 1
• Uart/sio Channels: 1
• I2c/sio Channels: 1
• High-speed Serial Output: 2
• Adc 8-bit Channels: -
• Adc 10-bit Channels: 16
• Da Converter Channels: -
• Timer Counter 18-bit Channel: -
• Timer Counter 16-bit Channel: 2
• Timer Counter 8-bit Channel: 2
• Motor Channels: -
• Watchdog Timer: Y
• Dual Clock: Y
• Clock Gear: -
• Number Of I/o Ports: 54
• Power Supply (v): 2.7 to 3.6

2.19.6 Operation Mode
RAM loader mode, FLASH memory SUM output mode and Product discrimination code
output mode. For details about these modes, refer to “(1) FLASH memory writing mode”
through “(4) Product discrimination code output mode”.
(1) FLASH memory writing mode
(2) RAM loader mode
(3) FLASH memory SUM output mode
(4) Product discrimination code output mode
There are four operating modes in serial PROM mode: FLASH memory writing mode,
should send the write data in the Intel Hex format (Binary). For details of writing data
format, refer to “2.19.7 FLASH memory Writing Data Format”.
memory is calculated and the result is returned to the controller.
passwords except a blank product. If the passwords did not match, the program is not
executed.
the controller in Intel Hex format. When the transfer has terminated normally, the
RAM loader calculates the SUM and sends the result to the controller before it starts
executing the user program. After sending of SUM, the program jumps to the start
address of RAM in which the first transferred data has been written. This RAM loader
function provides the user’s own way to control on-board programming.
blank product. If the passwords did not match, the program is not executed.
the controller.
Instead, it has this SUM command to use. By reading the SUM, it is possible to
manage Revisions of application programs.
address and the end address of ROM (In case of TMP86FM48, the start address is
8000H and the end address is FFFFH). Therefore, the controller can recognize the
device information by using this function.
The data are written to the specified FLASH memory addresses. The controller
If no errors are encountered till the end record, the SUM of 32 Kbytes of FLASH
To execute the FLASH memory writing mode, the TMP86FM48 checks the
The RAM loader transfers the data into the internal RAM that has been sent from
To execute the RAM loader mode, the TMP86FM48 checks the passwords except a
The SUM of 32 Kbytes of FLASH memory is calculated and the result is returned to
The BOOT ROM does not support the reading function of the FLASH memory.
The product discrimination code is output as a 13-byte data, that includes the start
86FM48-176
TMP86FM48
2007-08-24