st7pmc2s6 STMicroelectronics, st7pmc2s6 Datasheet - Page 369

• Manufacturer Part Number: st7pmc2s6
• Description: 8-bit Mcu For Automotive With Nested Interrupts, Flash, 10-bit Adc, Brushless Motor Control, 5 Timers, Spi, Linsci?
• Manufacturer: STMicroelectronics

ST7MC1K2-Auto, ST7MC1K6-Auto, ST7MC2S4-Auto, ST7MC2S6-Auto
16
Revision history
Table 233. Document revision history
12-Jul-2007
Date
Revision
Rev 1
Initial release
Principal differences between initial release of ST7MCxxx-Auto
datasheet and ST7MCx, revision 11 dated 8 December 2006:
Changed document title on
Changed root part numbers to ST7MC1K2-Auto, ST7MC1K6-Auto and
ST7MC2S4-Auto, ST7MC2S6-Auto throughout document
Removed all references to the SDIP32, LQFP80, and LQFP64
packages thoughout document
Updated all references to LQFP44 and LQFP32 packages
Updated memory and RAM throughout document to be specific to the
ST7MC1K2-Auto, ST7MC1K6-Auto and ST7MC2S4-Auto, ST7MC2S6-
Auto devices.
Updated temperatures ranges throughout document to include only
versions A and C
Removed all references relating to ‘standard and industrial’ from
document
Features on page
updated information on I/O ports and analog peripherals
Table 1: Device summary on page
Added footnote to
that it is mandatory to connect all available V
supply voltage and all V
Output compare on page
compare register i latch signal from
diagram, f
Section 13.2.4: Soldering information on page
ECOPACK
Table 226 on page
Table 229 on page
Added
page 362
Minor content differences between initial release of ST7MCxxx-Auto
datasheet and ST7MCx, revision 11 dated 8 December 2006:
Table 20: EICR register description on page
include only those found on the LQFP32 and LQFP44 packages
SCI control register 1 (SCICR1) on page
bit 1 to reserved
Examples of LDIV coding on page
Control register B (MCRB) on page 268
page
Table 209: General characteristics on page
PD7
Table 220: 10-bit ADC characteristics on page
explanation of the parameter I
285: Added footnote pertaining to pre-load bits
Section 15.3: TIMD set simultaneously with OC interrupt on
TIMER
on the limitations of the 16-bit timer
TM
with ECOPACK
= f
1: Changed number of I/0 ports from 60 to 34 and
Table 2: Device pin description on page 23
CPU
356: Modified option byte 2
358: Modified table for automotive versions only
/4 on page 114
SS
111: Changed text of note 3 and removed
and V
page 1
®
lkg
Changes
SSA
19: Updated
177: Modified example 3
Figure 49: Output compare timing
pins to ground.
and
171: Changed description of
329: Removed reference to
68: Updated ports to
DD
Parity register (MPAR) on
355: Replaced
347: Amended
and V
Revision history
DDA
pins to the
indicating
369/371