r8a77850anbg Renesas Electronics Corporation., r8a77850anbg Datasheet - Page 1492

• Manufacturer Part Number: r8a77850anbg
• Description: Renesas 32-bit Risc Microcomputer Superh? Risc Engine Family
• Manufacturer: Renesas Electronics Corporation.

29. User Break Controller (UBC)
Notes: 1. If the data value is included in the match conditions, be sure to specify the operand
Rev.1.00 Jan. 10, 2008 Page 1462 of 1658
REJ09B0261-0100
Bit
7, 6
5, 4
3
2, 1
0
2. If the quadword access is specified and the data value is included in the match
3. The OCBI instruction is handled as longword write access without the data value, and
Bit Name
CD
ID
—
RW
CE
size.
conditions, the upper and lower 32 bits of 64-bit data are each compared with the
contents of both the match data setting register and the match data mask setting
register.
the PREF, OCBP, and OCBWB instructions are handled as longword read access
without the data value. Therefore, do not include the data value in the match conditions
for these instructions.
Initial
Value
All 0
All 0
0
All 0
0
R/W
R/W
R/W
R
R/W
R/W
Channel Enable
Description
Bus Select
Specifies the bus to be included in the match
conditions. This bit is valid only when the operand
access cycle is specified as a match condition.
00: Operand bus for operand access
Others: Reserved (setting prohibited)
Instruction Fetch/Operand Access Select
Specifies the instruction fetch cycle or operand access
cycle as the match condition.
00: Instruction fetch cycle or operand access cycle
01: Instruction fetch cycle
10: Operand access cycle
11: Instruction fetch cycle or operand access cycle
Reserved
For read/write in this bit, refer to General Precautions
on Handling of Product.
Bus Command Select
Specifies the read/write cycle as the match condition.
This bit is valid only when the operand access cycle is
specified as a match condition.
00: Read cycle or write cycle
01: Read cycle
10: Write cycle
11: Read cycle or write cycle
Validates/invalidates the channel. If this bit is 0, all the
other bits in this register are invalid.
0: Invalidates the channel.
1: Validates the channel.