MC56F8245VLD Freescale Semiconductor, MC56F8245VLD Datasheet - Page 88

• Manufacturer Part Number: MC56F8245VLD
• Description: DSC 48K FLASH 60MHZ 44-LQFP
• Manufacturer: Freescale Semiconductor
• Series: 56F8xxxr

Specifications of MC56F8245VLD

• Core Processor: 56800E
• Core Size: 16-Bit
• Speed: 60MHz
• Connectivity: CAN, I²C, LIN, SCI, SPI
• Peripherals: LVD, POR, PWM, WDT
• Number Of I /o: 35
• Program Memory Size: 48KB (24K x 16)
• Program Memory Type: FLASH
• Ram Size: 3K x 16
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 8x12b, D/A 1x12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 105°C
• Package / Case: 44-LQFP
• Product: DSCs
• Processor Series: 56800E
• Core: 56800E
• Device Million Instructions Per Second: 60 MIPs
• Maximum Clock Frequency: 60 MHz
• Number Of Programmable I/os: 35
• Data Ram Size: 6 KB
• Operating Supply Voltage: 3.3 V
• Maximum Operating Temperature: + 105 C
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 12 bit, 4 Channel
• Package: 44LQFP
• Family Name: MC56F82xx
• Maximum Speed: 60 MHz
• Data Bus Width: 16 Bit
• Interface Type: I2C/SCI/SPI
• On-chip Dac: 1-chx12-bit
• Number Of Timers: 8
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

Functional Description
2.4.3 ADC Data Processing
The result of an ADC conversion process is normally sent to an adder for offset
correction, as the following figure shows. The adder subtracts the ADC_OFFST register
value from each sample, and the resultant value is stored in the result register (RSLT).
The raw ADC value and the RSLT values are checked for limit violations and zero-
crossing, as shown. Appropriate interrupts are asserted, if enabled.
The result value sign is determined from the ADC unsigned result minus the respective
offset register value. If the offset register is programmed with a value of zero, the result
register value is unsigned and equals the cyclic converter unsigned result. The range of
the result (RSLT) is 0000H–7FF8H, assuming that the offset register (OFFST) is cleared
to all zeros. This is equal to the raw value of the ADC core.
The processor can write the result registers used for the results of a scan when the STOP
bit for that scan is asserted. This write operation is treated as if it comes from the ADC
analog core, so the limit checking, zero crossing, and the offset registers function as if in
normal mode. For example, if the STOP bit is set to one and the processor writes to
RSLT5, the data written to the RSLT5 is multiplexed to the ADC digital logic inputs,
processed, and stored into RSLT5 as if the analog core had provided the data. This test
data must be justified, as illustrated by the RSLT register definition and does not include
the sign bit.
88
Figure 2-71. Typical Connections for Differential Measurements
V
REFH
Potential
MC56F825x/4x Reference Manual, Rev. 2, 10/2010
- -
Differential buffer centers about mid-point.
Center tap held at (V
+
V
REF
/2
AN+
AN–
REFH
Preliminary
+ V
AN+
AN–
Note: Normally, VREFLO is set to VSSA = 0 V.
REFLO
)/2.
Freescale Semiconductor