DSPIC33FJ16MC101T-I/SS Microchip Technology, DSPIC33FJ16MC101T-I/SS Datasheet - Page 200

• Manufacturer Part Number: DSPIC33FJ16MC101T-I/SS
• Description: 16-bit Motor Control DSC Family, 16 MIPS, 16KB Flash, 1KB RAM 20 SSOP .209in T/R
• Manufacturer: Microchip Technology
• Series: dsPIC™ 33Fr

Specifications of DSPIC33FJ16MC101T-I/SS

• Core Processor: dsPIC
• Core Size: 16-Bit
• Speed: 16 MIPs
• Connectivity: I²C, IrDA, LIN, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, Motor Control PWM, POR, PWM, WDT
• Number Of I /o: 15
• Program Memory Size: 16KB (16K x 8)
• Program Memory Type: FLASH
• Eeprom Size: -
• Ram Size: 1K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 4x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 20-SSOP (0.209", 5.30mm Width)
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

dsPIC33FJ16GP101/102 AND dsPIC33FJ16MC101/102
REGISTER 19-7:
DS70652C-page 200
bit 15
bit 7
Legend:
R = Readable bit
-n = Value at POR
bit 15-6
bit 5-0
Note 1:
U-0
U-0
—
—
2:
3:
4:
On devices without 6 analog inputs, all PCFG bits are R/W by user. However, PCFG bits are ignored on
ports without a corresponding input on device.
PCFGx = ANx, where x = 0 through 5.
PCFGx bits have no effect if the ADC module is disabled by setting ADxMD bit in the PMDx register. When
the bit is set, all port pins that have been multiplexed with ANx will be in Digital mode.
Pins shared with analog functions (i.e., ANx), are analog by default and therefore, must be set by the user
to enable any digital function on that pin. Reading any port pin with the analog function enabled will return
a ‘0’, regardless of the signal input level.
Unimplemented: Read as ‘0’
PCFG<5:0>: ADC Port Configuration Control bits
1 = Port pin in Digital mode, port read input enabled, ADC input multiplexer connected to AV
0 = Port pin in Analog mode, port read input disabled, ADC samples pin voltage
U-0
U-0
—
—
AD1PCFGL: ADC1 PORT CONFIGURATION REGISTER LOW
W = Writable bit
‘1’ = Bit is set
PCFG5
R/W-0
U-0
—
(4)
PCFG4
R/W-0
Preliminary
U-0
—
(4)
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared
PCFG3
R/W-0
U-0
—
(4)
(4)
PCFG2
R/W-0
U-0
—
(4)
© 2011 Microchip Technology Inc.
x = Bit is unknown
PCFG1
R/W-0
(1,2,3)
U-0
—
(4)
PCFG0
R/W-0
SS
U-0
—
bit 8
bit 0
(4)