mc9s12c32mpb16 Freescale Semiconductor, Inc, mc9s12c32mpb16 Datasheet - Page 435

• Manufacturer Part Number: mc9s12c32mpb16
• Description: Hcs12 Microcontrollers
• Manufacturer: Freescale Semiconductor, Inc

Chapter 15
Timer Module (TIM16B8CV1) Block Description
15.1
The basic timer consists of a 16-bit, software-programmable counter driven by a seven-stage
programmable prescaler.
This timer can be used for many purposes, including input waveform measurements while simultaneously
generating an output waveform. Pulse widths can vary from microseconds to many seconds.
This timer contains 8 complete input capture/output compare channels and one pulse accumulator. The
input capture function is used to detect a selected transition edge and record the time. The output compare
function is used for generating output signals or for timer software delays. The 16-bit pulse accumulator
is used to operate as a simple event counter or a gated time accumulator. The pulse accumulator shares
timer channel 7 when in event mode.
A full access for the counter registers or the input capture/output compare registers should take place in
one clock cycle. Accessing high byte and low byte separately for all of these registers may not yield the
same result as accessing them in one word.
15.1.1
The TIM16B8CV1 includes these distinctive features:
15.1.2
Stop:
Freeze:
Wait:
Normal:
Freescale Semiconductor
•
•
•
•
Eight input capture/output compare channels.
Clock prescaling.
16-bit counter.
16-bit pulse accumulator.
Introduction
Features
Modes of Operation
Timer is off because clocks are stopped.
Timer counter keep on running, unless TSFRZ in TSCR (0x0006) is set to 1.
Counters keep on running, unless TSWAI in TSCR (0x0006) is set to 1.
Timer counter keep on running, unless TEN in TSCR (0x0006) is cleared to 0.
MC9S12C-Family / MC9S12GC-Family
Rev 01.23
435