mc9s12c32mpb16 Freescale Semiconductor, Inc, mc9s12c32mpb16 Datasheet - Page 595

• Manufacturer Part Number: mc9s12c32mpb16
• Description: Hcs12 Microcontrollers
• Manufacturer: Freescale Semiconductor, Inc

20.4.1.3.3
The sector erase operation will erase all addresses in a
embedded algorithm.
An example flow to execute the sector erase operation is shown in
command write sequence is as follows:
If a Flash sector to be erased is in a protected area of the Flash array, the PVIOL flag in the FSTAT register
will set and the sector erase command will not launch. Once the sector erase command has successfully
launched, the CCIF flag in the FSTAT register will set after the sector erase operation has completed unless
a new command write sequence has been buffered.
Freescale Semiconductor
1. Write to a Flash array address to start the command write sequence for the sector erase command.
2. Write the sector erase command, 0x40, to the FCMD register.
3. Clear the CBEIF flag in the FSTAT register by writing a 1 to CBEIF to launch the sector erase
The Flash address written determines the sector to be erased while MCU address bits
data written are ignored.
command.
Sector Erase Command
MC9S12C-Family / MC9S12GC-Family
Rev 01.23
1024
byte sector of the Flash array using an
Chapter 20 96 Kbyte Flash Module (S12FTS96KV1)
Figure
20-24. The sector erase
[9:0]
and the
595