mc9s12c32mpb16 Freescale Semiconductor, Inc, mc9s12c32mpb16 Datasheet - Page 464

• Manufacturer Part Number: mc9s12c32mpb16
• Description: Hcs12 Microcontrollers
• Manufacturer: Freescale Semiconductor, Inc

Chapter 16 Dual Output Voltage Regulator (VREG3V3V2) Block Description
16.2.3
Signals V
logic. These signals are connected to device pins to allow external decoupling capacitors (100 nF...220 nF,
X7R ceramic).
In Shutdown Mode an external supply at V
16.2.4
Signals V
PLL and oscillator. These signals are connected to device pins to allow external decoupling capacitors
(100 nF...220 nF, X7R ceramic).
In Shutdown Mode an external supply at V
16.2.5
This optional signal is used to shutdown VREG3V3V2. In that case V
be provided externally. Shutdown Mode is entered with V
VREG3V3V2 is either in Full Performance Mode or in Reduced Power Mode.
For the connectivity of V
16.3
This subsection provides a detailed description of all registers accessible in VREG3V3V2.
16.3.1
Figure 16-2
464
DDPLL
DD
Memory Map and Register Definition
Address
0x0000
Offset
V
V
V
Module Memory Map
provides an overview of all used registers.
/V
DD
DDPLL
REGEN
Switching from FPM or RPM to shutdown of VREG3V3V2 and vice versa
is not supported while the MCU is powered.
SS
/V
, V
are the primary outputs of VREG3V3V2 that provide the power supply for the core
SSPLL
SS
, V
— Optional Regulator Enable
— Regulator Output1 (Core Logic)
are the secondary outputs of VREG3V3V2 that provide the power supply for the
SSPLL
REGEN
see device overview chapter.
— Regulator Output2 (PLL)
VREG3V3V2 Control Register (VREGCTRL)
Table 16-2. VREG3V3V2 Memory Map
MC9S12C-Family / MC9S12GC-Family
DD
DDPLL
/V
Rev 01.23
SS
NOTE
/V
Use
can replace the voltage regulator.
SSPLL
REGEN
can replace the voltage regulator.
being low. If V
DD
/V
SS
and V
REGEN
Freescale Semiconductor
DDPLL
is high, the
Access
R/W
/V
SSPLL
must