mt9074ap1 Zarlink Semiconductor, mt9074ap1 Datasheet - Page 111

no-image

mt9074ap1

Manufacturer Part Number
mt9074ap1
Description
T1/e1/j1 Single Chip Transceiver With Wide Dynamic Range Liu
Manufacturer
Zarlink Semiconductor
Datasheet

Available stocks

Company
Part Number
Manufacturer
Quantity
Price
Part Number:
MT9074AP1
Manufacturer:
ZARLINK
Quantity:
227
4-0
Bit
Bit
7
6
5
7
6
5
4
3
2
1
0
RNU4-8
RNFAB
RALM
Name
RIU1
Name
JACS
JACF
JAFC
JAE4
JAF4
JAE
JAF
- - -
Table 111 - Receive Non-Frame Alignment Signal
Table 110 - itter Attenuator Status Word
Receive International Use 1. This bit is received on the PCM30
2048 kbit/sec. link in bit position one of the non-frame alignment signal. It is
used for CRC-4 multiframe alignment or international use.
Receive Non-frame Alignment Bit. This bit is received on the PCM30
2048 kbit/sec. link in bit position two of the non-frame alignment signal. This
bit should be one in order to differentiate between frame alignment frames
and non-frame alignment frames.
Receive Alarm. This bit is received on the PCM30 2048 kbit/sec. link in bit
position three (the A bit) of the non-frame alignment signal. It is used as a
remote alarm indication (RAI) from the far end of the PCM30 link (1 - alarm,
0 - normal).
Receive National Use Four to Eight. These bits are received on the
PCM30 2048 kbit/sec. link in bit positions four to eight (the Sa bits) of the
non-frame alignment signal.
Jitter Attenuated Clock Slow. If one it indicates that the dejittered clock
period is increased by 1/16 UI. If zero the clock is at normal speed.
Jitter Attenuated Clock Fast. If one it indicates that the dejittered clock
period is decreased by 1/16 UI. If zero the clock is at normal speed.
Jitter Attenuator FIFO Empty. If one it indicates that the JA FIFO is empty.
Jitter Attenuator FIFO with 4 Full Locations. If one it indicates that the JA
FIFO has at least 4 full locations.
Jitter Attenuator Center Full. If one it indicates that the JA FIFO is at least
half full.
Jitter Attenuator FIFO with 4 Empty Locations. If one it indicates that the
JA FIFO has at most 4 empty locations.
Jitter Attenuator FIFO Full. If one it indicates that the JA FIFO is full.
Unused.
(Page 3, Address 18H) (E1)
(Page 3, Address 17H) (E1)
Zarlink Semiconductor Inc.
MT9074
111
Functional Description
Functional Description
Data Sheet

Related parts for mt9074ap1