DF2367VF33 Renesas Electronics America, DF2367VF33 Datasheet - Page 598

• Manufacturer Part Number: DF2367VF33
• Description: MCU 3V 384K 128-QFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8S/2300r

Specifications of DF2367VF33

• Core Processor: H8S/2000
• Core Size: 16-Bit
• Speed: 33MHz
• Connectivity: I²C, IrDA, SCI, SmartCard
• Peripherals: DMA, POR, PWM, WDT
• Number Of I /o: 84
• Program Memory Size: 384KB (384K x 8)
• Program Memory Type: FLASH
• Ram Size: 24K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 10x10b, D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 128-QFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -
• Other names: HD64F2367VF33; HD64F2367VF33

Section 13 Watchdog Timer
13.6.2
If a timer counter clock pulse is generated during the next cycle after the T
cycle, the write takes priority and the timer counter is not incremented. Figure 13.5 shows this
operation.
13.6.3
If bits CKS2 to CKS0 in TCSR are written to while the WDT is operating, errors could occur in
the incrementation. Software must stop the watchdog timer (by clearing the TME bit to 0) before
changing the value of bits CKS2 to CKS0.
13.6.4
If the mode is switched from watchdog timer to interval timer, while the WDT is operating, errors
could occur in the incrementation. Software must stop the watchdog timer (by clearing the TME
bit to 0) before switching the mode.
Rev.6.00 Mar. 18, 2009 Page 538 of 980
REJ09B0050-0600
φ
Address
Internal write signal
TCNT input clock
TCNT
Contention between Timer Counter (TCNT) Write and Increment
Changing Value of CKS2 to CKS0
Switching between Watchdog Timer Mode and Interval Timer Mode
Figure 13.5 Contention between TCNT Write and Increment
TCNT write cycle
T 1
T 2
Next cycle
N
Counter write data
M
2
state of a TCNT write