M30802FCGP#D3 Renesas Electronics America, M30802FCGP#D3 Datasheet - Page 5

• Manufacturer Part Number: M30802FCGP#D3
• Description: IC M16C MCU FLASH 128K 144LQFP
• Manufacturer: Renesas Electronics America
• Series: M16C™ M16C/80r

Specifications of M30802FCGP#D3

• Core Processor: M16C/80
• Core Size: 16-Bit
• Speed: 20MHz
• Connectivity: SIO, UART/USART
• Peripherals: DMA, PWM, WDT
• Number Of I /o: 121
• Program Memory Size: 128KB (128K x 8)
• Program Memory Type: FLASH
• Ram Size: 10K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 5.5 V
• Data Converters: A/D 10x10b, D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 144-LQFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -

1.Introduction
2.Register Diagram
This hardware manual provides detailes information on the M16C/80 group microcomputers.
Users are exoected to have basic knowledge of electric circuits,logical circuits and microcomputers.
The symbols,and descriptions,used for bit function in each register are shown below.
*1
*2
*3
Blank:Set to "0" or "1" according to intended use
0:
1:
X:
R:
W:
Terms to use here are explained as follows.
• Nothing is assigned
• Inhibited
• Reserved bit
• Function varies with each operation mode
• Must be fixed to "0" in A mode
• Invalid in A mode
• Valid when bit A="0"
Nothing is assigned to the bit concerned. When write, set "0" for new function in
future plan.
Not select. The operation at having selected is not guaranteed.
Reserved bit. Set the specified value.
Bit function changes according to the mode of peripheral functions.
Set the bit concerned to "0" in A mode.
The bit concerned has no function in A mode. Set the specified value.
When bit A is "1", the bit concerned has no function. When bit A is "0", the bit
concerned has function.
Set to "0"
Set to "1"
Nothing is assigned
Read
O.....Possible to read
X.....Impossible to read
–.....Nothing is assigned
Write
O.....Possible to write
X.....Written value is invalid
–.....Nothing is assigned
XXX register
b7
b6
When write, value can be "0" or "1"
b5
b4
b3
0
b2
b1
b0
Bit symbol
XXX0
XXX1
Nothing is assigned.
When write, set "0". When read, its content is indeterminate.
XXX
XXX
XXX
XXX
Reserved
Symbol
4
5
6
7
XXX
bit
How to Use This Manual
XXX select bit
Function varies with each operation mode
XXX flag
Bit name
*1
Address
XXX
b1 b0
1 0 : XXX
0 1 : XXX
1 0 : Inhibited
1 1 : XXX
Must always b set to "0"
When reset
00
16
Function
R
W
*2
*3