MC68HC908MR16CFU Freescale Semiconductor, MC68HC908MR16CFU Datasheet - Page 223

• Manufacturer Part Number: MC68HC908MR16CFU
• Description: IC MCU 8MHZ 16K FLASH 64-QFP
• Manufacturer: Freescale Semiconductor
• Series: HC08r

Specifications of MC68HC908MR16CFU

• Core Processor: HC08
• Core Size: 8-Bit
• Speed: 8MHz
• Connectivity: SCI, SPI
• Peripherals: LVD, POR, PWM
• Number Of I /o: 44
• Program Memory Size: 16KB (16K x 8)
• Program Memory Type: FLASH
• Ram Size: 768 x 8
• Voltage - Supply (vcc/vdd): 4.5 V ~ 5.5 V
• Data Converters: A/D 10x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 64-QFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -

16.3.4.2 Buffered PWM Signal Generation
Channels 0 and 1 can be linked to form a buffered PWM channel whose output appears on the
PTE4/TCH0A pin. The TIMA channel registers of the linked pair alternately control the pulse width of the
output.
Setting the MS0B bit in TIMA channel 0 status and control register (TASC0) links channel 0 and
channel 1. The TIMA channel 0 registers initially control the pulse width on the PTE4/TCH0A pin. Writing
to the TIMA channel 1 registers enables the TIMA channel 1 registers to synchronously control the pulse
width at the beginning of the next PWM period. At each subsequent overflow, the TIMA channel registers
(0 or 1) that control the pulse width are the ones written to last. TASC0 controls and monitors the buffered
PWM function, and TIMA channel 1 status and control register (TASC1) is unused. While the MS0B bit is
set, the channel 1 pin, PTE5/TCH1A, is available as a general-purpose
I/O pin.
Channels 2 and 3 can be linked to form a buffered PWM channel whose output appears on the
PTE6/TCH2A pin. The TIMA channel registers of the linked pair alternately control the pulse width of the
output.
Setting the MS2B bit in TIMA channel 2 status and control register (TASC2) links channel 2 and
channel 3. The TIMA channel 2 registers initially control the pulse width on the PTE6/TCH2A pin. Writing
to the TIMA channel 3 registers enables the TIMA channel 3 registers to synchronously control the pulse
width at the beginning of the next PWM period. At each subsequent overflow, the TIMA channel registers
(2 or 3) that control the pulse width are written to last. TASC2 controls and monitors the buffered PWM
function, and TIMA channel 3 status and control register (TASC3) is unused. While the MS2B bit is set,
the channel 3 pin, PTE7/TCH3A, is available as a general-purpose
I/O pin.
16.3.4.3 PWM Initialization
To ensure correct operation when generating unbuffered or buffered PWM signals, use this initialization
procedure:
Freescale Semiconductor
1. In the TIMA status and control register (TASC):
2. In the TIMA counter modulo registers (TAMODH–TAMODL), write the value for the required PWM
3. In the TIMA channel x registers (TACHxH–TACHxL), write the value for the required pulse width.
period.
a. Stop the TIMA counter by setting the TIMA stop bit, TSTOP.
b. Reset the TIMA counter and prescaler by setting the TIMA reset bit, TRST.
duty cycle generation and removes the ability of the channel to self-correct
in the event of software error or noise. Toggling on output compare also can
cause incorrect PWM signal generation when changing the PWM pulse
width to a new, much larger value.
In buffered PWM signal generation, do not write new pulse width values to
the currently active channel registers. User software should track the
currently active channel to prevent writing a new value to the active
channel. Writing to the active channel registers is the same as generating
unbuffered PWM signals.
MC68HC908MR32 • MC68HC908MR16 Data Sheet, Rev. 6.1
NOTE
Functional Description
223