MC68HC908MR16CFU Freescale Semiconductor, MC68HC908MR16CFU Datasheet - Page 44

• Manufacturer Part Number: MC68HC908MR16CFU
• Description: IC MCU 8MHZ 16K FLASH 64-QFP
• Manufacturer: Freescale Semiconductor
• Series: HC08r

Specifications of MC68HC908MR16CFU

• Core Processor: HC08
• Core Size: 8-Bit
• Speed: 8MHz
• Connectivity: SCI, SPI
• Peripherals: LVD, POR, PWM
• Number Of I /o: 44
• Program Memory Size: 16KB (16K x 8)
• Program Memory Type: FLASH
• Ram Size: 768 x 8
• Voltage - Supply (vcc/vdd): 4.5 V ~ 5.5 V
• Data Converters: A/D 10x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 64-QFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -

Memory
Refer to
2.8.7 Wait Mode
Putting the MCU into wait mode while the FLASH is in read mode does not affect the operation of the
FLASH memory directly, but there will not be any memory activity since the CPU is inactive.
The WAIT instruction should not be executed while performing a program or erase operation on the
FLASH. Otherwise, the operation will discontinue, and the FLASH will be on standby mode.
2.8.8 Stop Mode
Putting the MCU into stop mode while the FLASH is in read mode does not affect the operation of the
FLASH memory directly, but there will not be any memory activity since the CPU is inactive.
The STOP instruction should not be executed while performing a program or erase operation on the
FLASH, otherwise the operation will discontinue, and the FLASH will be on standby mode
44
Table 2-2
Note: The end address of the protected range is always $FFFF.
Standby mode is the power-saving mode of the FLASH module in which all
internal control signals to the FLASH are inactive and the current
consumption of the FLASH is at a minimum.
$FE (1111 1110)
$01 (0000 0001)
$02 (0000 0010)
for examples of the protect start address.
START ADDRESS OF FLASH
BPR[7:0]
$FF
$00
MC68HC908MR32 • MC68HC908MR16 Data Sheet, Rev. 6.1
Figure 2-6. FLASH Block Protect Start Address
BLOCK PROTECT
Table 2-2. Examples of Protect Start Address
1
The entire FLASH memory is not protected.
and so on...
The entire FLASH memory is protected.
FLBPR VALUE
NOTE
Start of Address of Protect Range
$FF00 (1111 1111 0000 0000)
$8080 (1000 0000 1000 0000)
$8100 (1000 0001 0000 0000)
16-BIT MEMORY ADDRESS
0
0
0
0
0
0
0
Freescale Semiconductor