s908gz60cfa Freescale Semiconductor, Inc, s908gz60cfa Datasheet - Page 124

no-image

s908gz60cfa

Manufacturer Part Number
s908gz60cfa
Description
M68hc08 Microcontrollers
Manufacturer
Freescale Semiconductor, Inc
Datasheet

Available stocks

Company
Part Number
Manufacturer
Quantity
Price
Part Number:
s908gz60cfaE
Manufacturer:
FREESCALE
Quantity:
1 780
Part Number:
s908gz60cfaE
Manufacturer:
FREESCALE
Quantity:
1 780
Part Number:
s908gz60cfaE
Manufacturer:
FREESCALE
Quantity:
8 000
Part Number:
s908gz60cfaE
Manufacturer:
FREESCALE
Quantity:
20 000
Low-Power Modes
10.3 Break Module (BRK)
10.3.1 Wait Mode
The break (BRK) module is active in wait mode. In the break routine, the user can subtract one from the
return address on the stack if the SBSW bit in the break status register is set.
10.3.2 Stop Mode
The break module is inactive in stop mode. The STOP instruction does not affect break module register
states.
10.4 Central Processor Unit (CPU)
10.4.1 Wait Mode
The WAIT instruction:
10.4.2 Stop Mode
The STOP instruction:
After exiting stop mode, the CPU clock begins running after the oscillator stabilization delay.
10.5 Clock Generator Module (CGM)
10.5.1 Wait Mode
The clock generator module (CGM) remains active in wait mode. Before entering wait mode, software can
disengage and turn off the PLL by clearing the BCS and PLLON bits in the PLL control register (PCTL).
Less power-sensitive applications can disengage the PLL without turning it off. Applications that require
the PLL to wake the MCU from wait mode also can deselect the PLL output without turning off the PLL.
10.5.2 Stop Mode
If the OSCENINSTOP bit in the CONFIG2 register is cleared (default), then the STOP instruction disables
the CGM (oscillator and phase-locked loop) and holds low all CGM outputs (CGMXCLK, CGMOUT, and
CGMINT).
If the OSCENINSTOP bit in the CONFIG2 register is set, then the phase locked loop is shut off, but the
oscillator will continue to operate in stop mode.
124
Clears the interrupt mask (I bit) in the condition code register, enabling interrupts. After exit from
wait mode by interrupt, the I bit remains clear. After exit by reset, the I bit is set.
Disables the CPU clock
Clears the interrupt mask (I bit) in the condition code register, enabling external interrupts. After
exit from stop mode by external interrupt, the I bit remains clear. After exit by reset, the I bit is set.
Disables the CPU clock
MC68HC908GZ60 • MC68HC908GZ48 • MC68HC908GZ32 Data Sheet, Rev. 6
Freescale Semiconductor

Related parts for s908gz60cfa