C8051F060_07 SILABS [Silicon Laboratories], C8051F060_07 Datasheet - Page 79
C8051F060_07
Manufacturer Part Number
C8051F060_07
Description
Mixed Signal ISP Flash MCU Family
Manufacturer
SILABS [Silicon Laboratories]
Datasheet
1.C8051F060_07.pdf
(328 pages)
- Current page: 79 of 328
- Download datasheet (3Mb)
6.6.
The DMA contains multiple interrupt sources. Some of these can be individually enabled to generate inter-
rupts as necessary. The DMA Control Register (DMA0CN, Figure 6.4) and DMA Configuration Register
(DMA0CF, Figure 6.5) contain the enable bits and flags for the DMA interrupt sources. When an interrupt is
enabled and the interrupt condition occurs, a DMA interrupt will be generated (EIE2.7 is set to ‘1’).
The DMA flags that can generate a DMA0 interrupt are:
6.7.
The data paths from the ADCs to XRAM are double-buffered when using the DMA interface. When a con-
version is completed by the ADC, it first enters the ADCs data register. If the DMA’s data buffer is empty,
the conversion results will immediately be written into the DMA’s internal data buffer for that ADC. Data in
the DMA’s internal data buffer is written to XRAM at the first available opportunity (see
Addressing and Setup” on page
the DMA’s data buffer until data in the buffer has been written to XRAM. When a conversion is completed
and the DMA’s data buffer is not empty, an overflow warning flag is generated. If a second conversion data
word becomes available before the DMA’s data buffer is written to XRAM, the data in the ADC’s data regis-
ters is over-written with the new data word, and a data overflow error flag is generated.
Interrupt Sources
1. DMA Operations Complete (DMA0CN.6, DMA0INT) occurs when all DMA operations have
2. ADC1 Data Overflow Error (DMA0CN.4, DMA0DE1) occurs when the DMA interface cannot
3. ADC0 Data Overflow Error (DMA0CN.3, DMA0DE0) occurs when the DMA interface cannot
4. ADC1 Data Overflow Warning (DMA0CN.1, DMA0DO1) occurs when data from ADC0
5. ADC0 Data Overflow Warning (DMA0CN.0, DMA0DO0) occurs when data from ADC1
6. Repeat Counter Overflow (DMA0CF.2, DMA0CI) occurs when the Repeat Counter reaches
7. End Of Operation (DMA0CF.0, DMA0EO) occurs when an End Of Operation instruction is
Data Buffer Overflow Warnings and Errors
been completed, and the DMA interface is idle.
access XRAM for two conversion cycles of ADC1. This flag indicates that at least one conver-
sion result from ADC1 has been discarded.
access XRAM for two conversion cycles of ADC0. This flag indicates that at least one conver-
sion result from ADC0 has been discarded.
becomes available and the DMA has not yet written the previous results to XRAM. This inter-
rupt source can be enabled and disabled with the Data Overflow Warning Enable bit
(DMA0CN.2, DMA0DOE).
becomes available and the DMA has not yet written the previous results to XRAM. This inter-
rupt source can be enabled and disabled with the Data Overflow Warning Enable bit
(DMA0CN.2, DMA0DOE).
the Repeat Counter Limit. This interrupt source can be enabled and disabled with the Repeat
Counter Overflow Interrupt Enable bit (DMA0CF.3, DMA0CIE).
reached in the Instruction Buffer. This interrupt source can be enabled and disabled with the
End Of Operation Interrupt Enable bit (DMA0CF.1, DMA0EOE).
76). Conversion results from the ADC’s data registers are not copied into
Rev. 1.2
C8051F060/1/2/3/4/5/6/7
Section “6.3. XRAM
79
Related parts for C8051F060_07
Image
Part Number
Description
Manufacturer
Datasheet
Request
R
Part Number:
Description:
PCI-EXPRESS GEN 1, GEN 2, & GEN 3 SIX OUTPUT CLOCK GENERATOR
Manufacturer:
SILABS [Silicon Laboratories]
Datasheet:
Part Number:
Description:
Si4010 KEY FOB DEMO KIT WITH AES CAPABILITY
Manufacturer:
SILABS [Silicon Laboratories]
Datasheet:
Part Number:
Description:
Si4010 DEVELOPMENT KIT USER’S GUIDE
Manufacturer:
SILABS [Silicon Laboratories]
Datasheet:
Part Number:
Description:
Si4010 SIMPLIFIED KEY FOB DEMO KIT USER’S GUIDE
Manufacturer:
SILABS [Silicon Laboratories]
Datasheet:
Part Number:
Description:
EZRADIO® TWO-WAY LINK DEVELOPMENT KIT USER’S
Manufacturer:
SILABS [Silicon Laboratories]
Datasheet:
Part Number:
Description:
Si4010 EZRADIO® REMOTE CONTROL DEMO KIT USER’S
Manufacturer:
SILABS [Silicon Laboratories]
Datasheet:
Part Number:
Description:
Si477X EVALUATION BOARD USER’S GUIDE
Manufacturer:
SILABS [Silicon Laboratories]
Part Number:
Description:
Si4455 EZRADIO® TWO-WAY LINK DEMO KIT
Manufacturer:
SILABS [Silicon Laboratories]
Datasheet:
Part Number:
Description:
0.5 AND 2.5 AMP ISODRIVERS WITH OPTO INPUT (2.5, 3.75, AND 5.0 KVRMS)
Manufacturer:
SILABS [Silicon Laboratories]
Datasheet:
Part Number:
Description:
SATELLITE RECEIVER FOR DVB-S/DSS
Manufacturer:
SILABS [Silicon Laboratories]
Datasheet:
Part Number:
Description:
RF SYNTHESIZER WITH INTEGRATED VCOS INTEGRATED VCOS
Manufacturer:
SILABS [Silicon Laboratories]
Datasheet:
Part Number:
Description:
V.90, V.34, V.32BIS, V.22BIS ISOMODEM WITH GLOBAL DAA
Manufacturer:
SILABS [Silicon Laboratories]
Datasheet:
Part Number:
Description:
V.90, V.34, V.32BIS ISOMODEM™ WITH INTEGRATED GLOBAL DAA
Manufacturer:
SILABS [Silicon Laboratories]
Datasheet:
Part Number:
Description:
Broadband AND Voice Telephony Solutions
Manufacturer:
SILABS [Silicon Laboratories]
Datasheet:
Part Number:
Description:
EMI MITIGATING 2.1X 5 W CLASS D AUDIO AMPLIFIER
Manufacturer:
SILABS [Silicon Laboratories]
Datasheet: