HD64F2338VFC25 Renesas Electronics America, HD64F2338VFC25 Datasheet - Page 661

• Manufacturer Part Number: HD64F2338VFC25
• Description: MCU 3V 256K 144-QFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8S/2300r

Specifications of HD64F2338VFC25

• Core Processor: H8S/2000
• Core Size: 16-Bit
• Speed: 25MHz
• Connectivity: SCI, SmartCard
• Peripherals: DMA, POR, PWM, WDT
• Number Of I /o: 106
• Program Memory Size: 256KB (256K x 8)
• Program Memory Type: FLASH
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 3.6 V
• Data Converters: A/D 12x10b; D/A 4x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 144-QFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -

Figure 14.4 shows a sample SCI initialization flowchart.
Set CKE1 and CKE0 bits in SCR
SCR to 1, and set RIE, TIE, TEIE,
Clear TE and RE bits in SCR to 0
and MPIE bits as necessary
Set data transfer format in
<Initialization completed>
1-bit interval elapsed?
Start of initialization
Set TE or RE bit in
SMR and SCMR
Set value in BRR
(TE, RE bits 0)
Figure 14.4 Sample SCI Initialization Flowchart
Yes
Wait
No
[1]
[2]
[3]
[4]
[1] Set the clock selection in SCR.
[2] Set the data transfer format in SMR
[3] Write a value corresponding to the
[4] Wait at least one bit interval, then
Rev.4.00 Sep. 07, 2007 Page 629 of 1210
Be sure to clear bits RIE, TIE,
TEIE, MPIE, TE, and RE, to 0.
When the clock is selected in
asynchronous mode, it is output
immediately after SCR settings are
made.
and SCMR.
bit rate to BRR. (Not necessary if
an external clock is used.)
set the TE bit or RE bit in SCR to 1.
Also set the RIE, TIE, TEIE, and
MPIE bits as necessary.
Setting the TE or RE bit enables
the TxD or RxD pin to be used.
REJ09B0245-0400