UPD70F3765GF-GAT-AX Renesas Electronics America, UPD70F3765GF-GAT-AX Datasheet - Page 1386

• Manufacturer Part Number: UPD70F3765GF-GAT-AX
• Description: MCU 32BIT V850ES/JX3-H 128-LQFP
• Manufacturer: Renesas Electronics America
• Series: V850ES/Jx3-Hr

Specifications of UPD70F3765GF-GAT-AX

• Core Processor: RISC
• Core Size: 32-Bit
• Speed: 48MHz
• Connectivity: CSI, EBI/EMI, I²C, UART/USART, USB
• Peripherals: DMA, LVD, PWM, WDT
• Number Of I /o: 96
• Program Memory Size: 256KB (256K x 8)
• Program Memory Type: FLASH
• Ram Size: 40K x 8
• Voltage - Supply (vcc/vdd): 2.85 V ~ 3.6 V
• Data Converters: A/D 12x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: *
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

V850ES/JG3-H, V850ES/JH3-H
31.5.6 Internal resources used
freely for purposes other than self programming.
R01UH0042EJ0400 Rev.4.00
Sep 30, 2010
The following table lists the internal resources used for self programming. These internal resources can also be used
Note About resources used, refer to the Flash Memory Self-Programming Library User’s Manual.
Stack area
Library code
Application program
Maskable interrupt
NMI interrupt
Resource Name
Note
An extension of the stack used by the user is used by the library (can be used in both the
internal RAM and external RAM).
Program entity of library (can be used anywhere other than the flash memory block to be
manipulated).
Executed as user application.
Calls flash functions.
Can be used in the user application execution status or self-programming status. To use
this interrupt in the self-programming status, since the processing transits to the address
of the internal RAM start address + 4 addresses, allocate the jump instruction that transits
the processing to the user interrupt servicing at the address of the internal RAM start
address + 4 addresses in advance.
Can be used in the user application execution status or self-programming status. To use
this interrupt in the self-programming status, since the processing transits to the address
of the internal RAM start address, allocate the jump instruction that transits the
processing to the user interrupt servicing at the internal RAM start address in advance.
Table 31-12. Internal Resources Used
Description
CHAPTER 31 FLASH MEMORY
Page 1386 of 1509