UPD70F3765GF-GAT-AX Renesas Electronics America, UPD70F3765GF-GAT-AX Datasheet - Page 965

• Manufacturer Part Number: UPD70F3765GF-GAT-AX
• Description: MCU 32BIT V850ES/JX3-H 128-LQFP
• Manufacturer: Renesas Electronics America
• Series: V850ES/Jx3-Hr

Specifications of UPD70F3765GF-GAT-AX

• Core Processor: RISC
• Core Size: 32-Bit
• Speed: 48MHz
• Connectivity: CSI, EBI/EMI, I²C, UART/USART, USB
• Peripherals: DMA, LVD, PWM, WDT
• Number Of I /o: 96
• Program Memory Size: 256KB (256K x 8)
• Program Memory Type: FLASH
• Ram Size: 40K x 8
• Voltage - Supply (vcc/vdd): 2.85 V ~ 3.6 V
• Data Converters: A/D 12x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: *
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

V850ES/JG3-H, V850ES/JH3-H
R01UH0042EJ0400 Rev.4.00
Sep 30, 2010
(b) Write
(16) CAN0 module last out-pointer register (C0LOPT)
Remark The value read from the C0LOPT register is undefined if a data frame or remote frame has never
The C0LOPT register indicates the number of the message buffer to which a data frame or a remote frame was
transmitted last.
After reset: Undefined
C0LOPT
LOPT7 to LOPT0
Clear ROVF
0 to 31
0
1
been transmitted from a message buffer. If the C0TGPT.THPM bit is set to 1 after the CAN module
has changed from the initialization mode to an operation mode, therefore, the read value of the
C0LOPT register is undefined.
ROVF bit is not changed.
ROVF bit is cleared to 0.
LOPT7
When the C0LOPT register is read, the contents of the element indexed by the last out-pointer
(LOPT) of the receive history list are read. These contents indicate the number of the message
buffer to which a data frame or a remote frame was transmitted last.
7
R
LOPT6
6
Address: C0LOPT 03FEC062H, C1LOPT 03FEC662H
LOPT5
Last out-pointer of transmit history list (LOPT)
5
LOPT4
Setting of ROVF bit
4
LOPT3
3
CHAPTER 20 CAN CONTROLLER
LOPT2
2
LOPT1
1
Page 965 of 1509
LOPT0
0
(2/2)