MC9S12E64CFU Freescale Semiconductor, MC9S12E64CFU Datasheet - Page 432

• Manufacturer Part Number: MC9S12E64CFU
• Description: IC MCU 64K FLASH 25MHZ 80-QFP
• Manufacturer: Freescale Semiconductor
• Series: HCS12r

Specifications of MC9S12E64CFU

• Core Processor: HCS12
• Core Size: 16-Bit
• Speed: 25MHz
• Connectivity: EBI/EMI, I²C, SCI, SPI
• Peripherals: POR, PWM, WDT
• Number Of I /o: 60
• Program Memory Size: 64KB (64K x 8)
• Program Memory Type: FLASH
• Ram Size: 4K x 8
• Voltage - Supply (vcc/vdd): 2.35 V ~ 2.75 V
• Data Converters: A/D 16x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 80-QFP
• Data Bus Width: 16 bit
• Data Ram Size: 4 KB
• Interface Type: SCI, SPI
• Maximum Clock Frequency: 25 MHz
• Number Of Programmable I/os: 60
• Number Of Timers: 16 bit
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit
• On-chip Dac: 8 bit, 2 Channel
• For Use With: M68EVB912E128 - BOARD EVAL FOR MC9S12E128/64
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: No RoHS Version Available

Chapter 13 Timer Module (TIM16B4CV1)
For the description of PACLK please refer
If the pulse accumulator is disabled (PAEN = 0), the prescaler clock from the timer is always used as an
input clock to the timer counter. The change from one selected clock to the other happens immediately
after these bits are written.
432
PAOVI
Field
PAI
1
0
Pulse Accumulator Overflow Interrupt Enable
0 Interrupt inhibited.
1 Interrupt requested if PAOVF is set.
Pulse Accumulator Input Interrupt Enable
0 Interrupt inhibited.
1 Interrupt requested if PAIF is set.
If the timer is not active (TEN = 0 in TSCR), there is no divide-by-64
because the 64 clock is generated by the timer prescaler.
PAMOD
CLK1
0
0
1
1
0
0
1
1
Table 13-17. PACTL Field Descriptions (continued)
PEDGE
CLK0
0
1
0
1
0
1
0
1
Table 13-19. Timer Clock Selection
MC9S12E128 Data Sheet, Rev. 1.07
Table 13-18. Pin Action
Use PACLK/65536 as timer counter clock frequency
Use PACLK/256 as timer counter clock frequency
Figure
Use timer prescaler clock as timer counter clock
Div. by 64 clock enabled with pin high level
Use PACLK as input to timer counter clock
Div. by 64 clock enabled with pin low level
NOTE
13-22.
Description
Timer Clock
Falling edge
Rising edge
Pin Action
Freescale Semiconductor