AT91SAM7X128 Atmel, AT91SAM7X128 Datasheet - Page 431

• Manufacturer Part Number: AT91SAM7X128
• Description: MCU 32-Bit 91S ARM7TDMI RISC 128KB Flash 1.8V/3.3V 100-Pin LQFP
• Manufacturer: Atmel

Specifications of AT91SAM7X128

• Package: 100LQFP
• Device Core: ARM7TDMI
• Family Name: 91S
• Maximum Speed: 55 MHz
• Ram Size: 32 KB
• Program Memory Size: 128 KB
• Operating Supply Voltage: 1.8|3.3 V
• Data Bus Width: 32 Bit
• Program Memory Type: Flash
• Number Of Programmable I/os: 62
• Interface Type: CAN/Ethernet/SPI/I2S/TWI/USART/USB
• On-chip Adc: 8-chx10-bit
• Operating Temperature: -40 to 85 °C
• Number Of Timers: 3

6120H–ATARM–17-Feb-09
Figure 33-6. Synchronized Period or Duty Cycle Update
To prevent overwriting the PWM_CUPDx by software, the user can use status events in order to
synchronize his software. Two methods are possible. In both, the user must enable the dedi-
cated interrupt in PWM_IER at PWM Controller level.
The first method (polling method) consists of reading the relevant status bit in PWM_ISR Regis-
ter according to the enabled channel(s). See
The second method uses an Interrupt Service Routine associated with the PWM channel.
Note:
Figure 33-7. Polling Method
Note:
Reading the PWM_ISR register automatically clears CHIDx flags.
Polarity and alignment can be modified only when the channel is disabled.
End of Cycle
Acknowledgement and clear previous register state
AT91SAM7X512/256/128 Preliminary
The last write has been taken into account
PWM_CPRDx
Update of the Period or Duty Cycle
Writing in PWM_CUPDx
PWM_CUPDx Value
Writing in CPD field
PWM_ISR Read
1
User's Writing
CHIDx = 1
Figure
YES
PWM_CDTYx
0
33-7.
PWM_CMRx. CPD
431