PEB 4364 T V1.2 Infineon Technologies, PEB 4364 T V1.2 Datasheet - Page 167

• Manufacturer Part Number: PEB 4364 T V1.2
• Description: IC SLIC VOICE ACCESS PDSO-36
• Manufacturer: Infineon Technologies
• Series: DuSLICr

Specifications of PEB 4364 T V1.2

• Function: Dual Channel Subscriber Line Interface Circuit (DuSLIC)
• Interface: IOM-2, PCM
• Number Of Circuits: 2
• Voltage - Supply: 3.3 V ~ 5 V
• Current - Supply: 105mA
• Operating Temperature: -40°C ~ 85°C
• Mounting Type: Surface Mount
• Package / Case: 36-PDSO
• Includes: DTMF Generator and Decoder, Line Echo Cancellation (LEC), Teletax (TTX) Generation, Universal Tone Detection (UTD)
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Power (watts): -
• Other names: PEB4364TV1.2XT; SP000007728

Bit
HIR
HIT
SLEEP-EN Enables Sleep mode of the DuSLIC channel. Valid only in the Power Down
REVPOL Reverses the polarity of DC feeding
Preliminary Data Sheet
15
H
BCR1
ringing on the TIP wire (ROT) is enabled. In Active mode, high impedance
on the TIP wire is performed (HIT). If the HIR bit is set in addition to the HIT
bit, the HIRT mode is activated.
HIT = 0
HIT = 1
This bit modifies different basic modes. In ringing mode, an unbalanced
ringing on the RING wire (ROR) is enabled. In Active mode, high impedance
on the RING wire is activated (HIR). If the HIT bit is set in addition to the HIR
bit, the HIRT mode is activated.
HIR = 0
HIR = 1
This bit modifies different basic modes. In ringing mode, an unbalanced
REVPOL = 0
REVPOL = 1
HIR
7
mode of the SLICOFI-2.
SLEEP-EN = 0
SLEEP-EN = 1
Basic Configuration Register 1
HIT
6
Normal operation (ringing mode).
Controls SLIC-E/-E2/-P interface and sets the RING wire
to high impedance (Active mode).
Normal operation (ringing mode).
Controls SLIC-E/-E2/-P interface and sets the TIP wire to
high impedance (Active mode).
Normal polarity.
Reverse polarity.
SLEEP-
Sleep mode is disabled.
Sleep mode is enabled.
Note: SLEEP-EN has to be set before entering the
EN
5
Power Down mode.
REVPOL ACTR
167
4
3
ACTL
2
00
H
SEL-SLIC[1:0]
DS3, 2003-07-11
1
DuSLIC
0
Y