PEF 22508 E V1.1-G Infineon Technologies, PEF 22508 E V1.1-G Datasheet - Page 2

• Manufacturer Part Number: PEF 22508 E V1.1-G
• Description: IC INTERFACE E1/T1/J1 LBGA-256
• Manufacturer: Infineon Technologies
• Series: OctalLIU™r

Specifications of PEF 22508 E V1.1-G

• Function: Line Interface Unit (LIU)
• Interface: E1, J1, T1
• Number Of Circuits: 8
• Voltage - Supply: 1.8V, 3.3V
• Current - Supply: 370mA
• Power (watts): 140mW
• Operating Temperature: -40°C ~ 85°C
• Mounting Type: Surface Mount
• Package / Case: 256-LSBGA
• Includes: Automatic Protection Switching, Clock Generation, Power-Down, Transmit Line Monitor, Tristate Function
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Other names: PEF22508EV1.1T; PEF22508EV11GXP; SP000029953

The information in this document is subject to change without notice.
Edition 2005-06-02
Published by Infineon Technologies AG,
St.-Martin-Strasse 53,
81669 München, Germany
Infineon Technologies AG 2005.
©
All Rights Reserved.
Attention please!
The information herein is given to describe certain components and shall not be considered as a guarantee of
characteristics.
Terms of delivery and rights to technical change reserved.
We hereby disclaim any and all warranties, including but not limited to warranties of non-infringement, regarding
circuits, descriptions and charts stated herein.
Information
For further information on technology, delivery terms and conditions and prices please contact your nearest
Infineon Technologies Office (www.infineon.com).
Warnings
Due to technical requirements components may contain dangerous substances. For information on the types in
question please contact your nearest Infineon Technologies Office.
Infineon Technologies Components may only be used in life-support devices or systems with the express written
approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure
of that life-support device or system, or to affect the safety or effectiveness of that device or system. Life support
devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain
and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may
be endangered.