LPC1759FBD80,551 NXP Semiconductors, LPC1759FBD80,551 Datasheet - Page 172

• Manufacturer Part Number: LPC1759FBD80,551
• Description: IC ARM CORTEX MCU 512K 80-LQFP
• Manufacturer: NXP Semiconductors
• Series: LPC17xxr

Specifications of LPC1759FBD80,551

• Program Memory Type: FLASH
• Program Memory Size: 512KB (512K x 8)
• Package / Case: 80-LQFP
• Core Processor: ARM® Cortex-M3™
• Core Size: 32-Bit
• Speed: 120MHz
• Connectivity: CAN, I²C, IrDA, Microwire, SPI, SSI, SSP, UART/USART, USB OTG
• Peripherals: Brown-out Detect/Reset, DMA, I²S, Motor Control PWM, POR, PWM, WDT
• Number Of I /o: 52
• Ram Size: 64K x 8
• Voltage - Supply (vcc/vdd): 2.4 V ~ 3.6 V
• Data Converters: A/D 6x12b, D/A 1x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Processor Series: LPC17
• Core: ARM Cortex M3
• Data Bus Width: 32 bit
• Data Ram Size: 64 KB
• Interface Type: Ethernet, USB, OTG, CAN
• Maximum Clock Frequency: 120 MHz
• Number Of Programmable I/os: 52
• Number Of Timers: 4
• Operating Supply Voltage: 3.3 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: MDK-ARM, RL-ARM, ULINK2
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 12 bit, 6 Channel
• On-chip Dac: 10 bit
• Package: 80LQFP
• Device Core: ARM Cortex M3
• Family Name: LPC17xx
• Maximum Speed: 120 MHz
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: 622-1005 - USB IN-CIRCUIT PROG ARM7 LPC2K
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 568-4968; 935290523551

NXP Semiconductors
10.15 Descriptor and status formats
UM10360
User manual
Fig 19. Receive descriptor memory layout
RxDescriptorNumber
10.15.1 Receive descriptors and statuses
RxDescriptor
1
2
3
4
5
This section defines the descriptor format for the transmit and receive scatter/gather DMA
engines. Each Ethernet frame can consist of one or more fragments. Each fragment
corresponds to a single descriptor. The DMA managers in the Ethernet block scatter (for
receive) and gather (for transmit) multiple fragments for a single Ethernet frame.
Figure 19
Receive descriptors are stored in an array in memory. The base address of the array is
stored in the RxDescriptor register, and should be aligned on a 4 byte address boundary.
The number of descriptors in the array is stored in the RxDescriptorNumber register using
a minus one encoding style e.g. if the array has 8 elements the register value should be 7.
Parallel to the descriptors there is an array of statuses. For each element of the descriptor
array there is an associated status field in the status array. The base address of the status
array is stored in the RxStatus register, and must be aligned on an 8 byte address
boundary. During operation (when the receive data path is enabled) the RxDescriptor,
RxStatus and RxDescriptorNumber registers should not be modified.
Two registers, RxConsumeIndex and RxProduceIndex, define the descriptor locations
that will be used next by hardware and software. Both registers act as counters starting at
0 and wrapping when they reach the value of RxDescriptorNumber. The RxProduceIndex
contains the index of the descriptor that is going to be filled with the next frame being
CONTROL
CONTROL
CONTROL
CONTROL
CONTROL
CONTROL
depicts the layout of the receive descriptors in memory.
PACKET
PACKET
PACKET
PACKET
PACKET
PACKET
All information provided in this document is subject to legal disclaimers.
Rev. 2 — 19 August 2010
DATA BUFFER
DATA BUFFER
DATA BUFFER
DATA BUFFER
DATA BUFFER
DATA BUFFER
RxStatus
Chapter 10: LPC17xx Ethernet
StatusHashCRC
StatusHashCRC
StatusHashCRC
StatusHashCRC
StatusHashCRC
StatusHashCRC
StatusInfo
StatusInfo
StatusInfo
StatusInfo
StatusInfo
StatusInfo
UM10360
© NXP B.V. 2010. All rights reserved.
172 of 840