LPC1759FBD80,551 NXP Semiconductors, LPC1759FBD80,551 Datasheet - Page 268

• Manufacturer Part Number: LPC1759FBD80,551
• Description: IC ARM CORTEX MCU 512K 80-LQFP
• Manufacturer: NXP Semiconductors
• Series: LPC17xxr

Specifications of LPC1759FBD80,551

• Program Memory Type: FLASH
• Program Memory Size: 512KB (512K x 8)
• Package / Case: 80-LQFP
• Core Processor: ARM® Cortex-M3™
• Core Size: 32-Bit
• Speed: 120MHz
• Connectivity: CAN, I²C, IrDA, Microwire, SPI, SSI, SSP, UART/USART, USB OTG
• Peripherals: Brown-out Detect/Reset, DMA, I²S, Motor Control PWM, POR, PWM, WDT
• Number Of I /o: 52
• Ram Size: 64K x 8
• Voltage - Supply (vcc/vdd): 2.4 V ~ 3.6 V
• Data Converters: A/D 6x12b, D/A 1x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Processor Series: LPC17
• Core: ARM Cortex M3
• Data Bus Width: 32 bit
• Data Ram Size: 64 KB
• Interface Type: Ethernet, USB, OTG, CAN
• Maximum Clock Frequency: 120 MHz
• Number Of Programmable I/os: 52
• Number Of Timers: 4
• Operating Supply Voltage: 3.3 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: MDK-ARM, RL-ARM, ULINK2
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 12 bit, 6 Channel
• On-chip Dac: 10 bit
• Package: 80LQFP
• Device Core: ARM Cortex M3
• Family Name: LPC17xx
• Maximum Speed: 120 MHz
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: 622-1005 - USB IN-CIRCUIT PROG ARM7 LPC2K
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 568-4968; 935290523551

NXP Semiconductors
UM10360
User manual
11.16.2 Isochronous endpoints
11. Both B_1 and B_2 are empty, and the active buffer is B_2. The next packet written by
In DMA mode, switching of the active buffer is handled automatically in hardware. For
Bulk IN endpoints, proactively filling an endpoint buffer to take advantage of the double
buffering can be accomplished by manually starting a packet transfer using the
USBDMARSet register.
For isochronous endpoints, the active data buffer is switched by hardware when the
FRAME interrupt occurs. The SIE Clear Buffer and Validate Buffer commands do not
cause the active buffer to be switched.
Double buffering allows the software to make full use of the frame interval writing or
reading a packet to or from the active buffer, while the packet in the other buffer is being
sent or received on the bus.
For an OUT isochronous endpoint, any data not read from the active buffer before the end
of the frame is lost when it switches.
For an IN isochronous endpoint, if the active buffer is not validated before the end of the
frame, an empty packet is sent on the bus when the active buffer is switched, and its
contents will be overwritten when it becomes active again.
software will go into B_2.
All information provided in this document is subject to legal disclaimers.
Rev. 2 — 19 August 2010
Chapter 11: LPC17xx USB device controller
UM10360
© NXP B.V. 2010. All rights reserved.
268 of 840