MCHC908JW32FAE Freescale Semiconductor, MCHC908JW32FAE Datasheet - Page 123

• Manufacturer Part Number: MCHC908JW32FAE
• Description: IC MCU 32K FLASH 8MHZ 48-LQFP
• Manufacturer: Freescale Semiconductor
• Series: HC08r

Specifications of MCHC908JW32FAE

• Core Processor: HC08
• Core Size: 8-Bit
• Speed: 8MHz
• Connectivity: SPI, USB
• Peripherals: LED, LVD, POR, PWM
• Number Of I /o: 29
• Program Memory Size: 32KB (32K x 8)
• Program Memory Type: FLASH
• Ram Size: 1K x 8
• Voltage - Supply (vcc/vdd): 3.5 V ~ 5.5 V
• Oscillator Type: Internal
• Operating Temperature: 0°C ~ 70°C
• Package / Case: 48-LQFP
• Controller Family/series: HC08
• No. Of I/o's: 48
• Ram Memory Size: 1KB
• Cpu Speed: 8MHz
• No. Of Timers: 1
• Embedded Interface Type: SPI
• Rohs Compliant: Yes
• Processor Series: HC08JW
• Core: HC08
• Data Bus Width: 8 bit
• Data Ram Size: 1 KB
• Interface Type: SPI, USB
• Number Of Programmable I/os: 29
• Number Of Timers: 2
• Maximum Operating Temperature: + 70 C
• Mounting Style: SMD/SMT
• Development Tools By Supplier: FSICEBASE, DEMO908GZ60E, M68EML08GZE, KITUSBSPIDGLEVME, KITUSBSPIEVME, KIT33810EKEVME
• Minimum Operating Temperature: 0 C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Data Converters: -
• Lead Free Status / Rohs Status: Details

Chapter 9
Timebase Module (TBM)
9.1 Introduction
This section describes the timebase module (TBM). The TBM will generate periodic interrupts at user
selectable rates using a counter clocked by the selected OSCCLK clock from the oscillator module. This
TBM version uses 18 divider stages, eight of which are user selectable.
9.2 Features
Features of the TBM module include:
9.3 Functional Description
This module can generate a periodic interrupt by dividing the oscillator clock frequency, OSCCLK. The
counter is initialized to all 0s when TBON bit is cleared. The counter, shown in
when the TBON bit is set. When the counter overflows at the tap selected by TBR2:TBR0, the TBIF bit
gets set. If the TBIE bit is set, an interrupt request is sent to the CPU. The TBIF flag is cleared by writing
a 1 to the TACK bit. The first time the TBIF flag is set after enabling the timebase module, the interrupt is
generated at approximately half of the overflow period. Subsequent events occur at the exact period.
Freescale Semiconductor
•
•
•
88-kHz build-in RC clock.
Software programmable ~3s, ~1.5s, ~745ms, ~372ms, ~186ms, ~93ms, ~47ms, and ~23ms
periodic interrupt
User selectable oscillator clock source enable during stop mode to allow periodic wake-up from
stop
MC68HC908JW32 Data Sheet, Rev. 6
Figure
9-1, starts counting
123