UPD78F9222MC(T)-5A4-A NEC, UPD78F9222MC(T)-5A4-A Datasheet - Page 100

• Manufacturer Part Number: UPD78F9222MC(T)-5A4-A
• Description: 8BIT MCU, 4K FLASH, 256B RAM, 78F9222
• Manufacturer: NEC

Specifications of UPD78F9222MC(T)-5A4-A

• Controller Family/series: UPD78
• No. Of I/o's: 17
• Ram Memory Size: 256Byte
• Cpu Speed: 10MHz
• No. Of Timers: 4
• No. Of: RoHS Compliant
• Core Size: 8bit
• Program Memory Size: 4KB
• Oscillator Type: External, Internal

6.4.3
counter 00 (TM00).
restarting the timer in synchronization with the edge of the signal input to the TI000 pin.
the necessary pulse width. Clear the overflow flag after checking it.
prescaler mode register 00 (PRM00) and the valid level of the TI000 or TI010 pin is detected twice, thus eliminating
noise with a short pulse width.
100
It is possible to measure the pulse width of the signals input to the TI000 pin and TI010 pin using 16-bit timer
There are two measurement methods: measuring with TM00 used in free-running mode, and measuring by
When an interrupt occurs, read the valid value of the capture register, check the overflow flag, and then calculate
The capture operation is not performed until the signal pulse width is sampled in the count clock cycle selected by
The basic operation setting procedure is as follows.
<1> Set the CRC00 register (see Figures 6-18, 6-21, 6-23, and 6-25 for the set value).
<2> Set the count clock by using the PRM00 register.
<3> Set the TMC00 register to start the operation (see Figures 6-18, 6-21, 6-23, and 6-25 for the set value).
Caution To use two capture registers, set the TI000 and TI010 pins.
Remarks 1. For the setting of the TI000 (or TI010) pin, see 6.3 (5) Port mode register 3 (PM3).
Setting
Pulse width measurement operations
Rising edge detection
2. For how to enable the INTTM000 (or INTTM010) interrupt, see CHAPTER 12
FUNCTIONS.
Count clock
INTTM010
Figure 6-17. CR010 Capture Operation with Rising Edge Specified
CR010
TM00
TI000
CHAPTER 6 16-BIT TIMER/EVENT COUNTER 00
N − 3
User’s Manual U16898EJ5V0UD
N − 2
N − 1
N
N
N + 1
INTERRUPT