PIC18F8520-I/PT Microchip Technology Inc., PIC18F8520-I/PT Datasheet - Page 87

• Manufacturer Part Number: PIC18F8520-I/PT
• Description: 80 PIN, 32 KB FLASH, 2048 RAM, 68 I/O
• Manufacturer: Microchip Technology Inc.

Specifications of PIC18F8520-I/PT

• A/d Inputs: 16-Channel, 10-Bit
• Comparators: 2
• Cpu Speed: 10 MIPS
• Eeprom Memory: 1024 Bytes
• Input Output: 68
• Interface: I2C/SPI/UART/USART
• Memory Type: Flash
• Number Of Bits: 8
• Package Type: 80-pin TQFP
• Programmable Memory: 32K Bytes
• Ram Size: 2K Bytes
• Speed: 40 MHz
• Timers: 2-8-bit, 3-16-bit
• Voltage, Range: 2-5.5 V
• Lead Free Status / Rohs Status: RoHS Compliant part

8.0
8.1
An 8 x 8 hardware multiplier is included in the ALU of
the PIC18FXX20 devices. By making the multiply a
hardware operation, it completes in a single instruction
cycle. This is an unsigned multiply that gives a 16-bit
result. The result is stored in the 16-bit product register
pair (PRODH:PRODL). The multiplier does not affect
any flags in the ALUSTA register.
Making the 8 x 8 multiplier execute in a single cycle
gives the following advantages:
• Higher computational throughput
• Reduces code size requirements for multiply
The performance increase allows the device to be used
in applications previously reserved for Digital Signal
Processors.
Table 8-1 shows a performance comparison between
enhanced devices using the single-cycle hardware
multiply and performing the same function without the
hardware multiply.
TABLE 8-1:
 2004 Microchip Technology Inc.
8 x 8 unsigned
8 x 8 signed
16 x 16 unsigned
16 x 16 signed
algorithms
Routine
8 X 8 HARDWARE MULTIPLIER
Introduction
PIC18F6520/8520/6620/8620/6720/8720
PERFORMANCE COMPARISON
Without hardware multiply
Hardware multiply
Without hardware multiply
Hardware multiply
Without hardware multiply
Hardware multiply
Without hardware multiply
Hardware multiply
Multiply Method
Program
Memory
(Words)
13
33
21
28
52
35
1
6
8.2
Example 8-1 shows the sequence to do an 8 x 8
unsigned multiply. Only one instruction is required
when one argument of the multiply is already loaded in
the WREG register.
Example 8-2 shows the sequence to do an 8 x 8 signed
multiply. To account for the sign bits of the arguments,
each argument’s Most Significant bit (MSb) is tested
and the appropriate subtractions are done.
EXAMPLE 8-1:
EXAMPLE 8-2:
MOVF
MULWF
MOVF
MULWF
BTFSC
SUBWF
MOVF
BTFSC
SUBWF
Cycles
(Max)
242
254
69
91
28
40
1
6
Operation
ARG1, W
ARG2
ARG1, W
ARG2
ARG2, SB
PRODH, F
ARG2, W
ARG1, SB
PRODH, F
@ 40 MHz
24.2 s
25.4 s
100 ns
600 ns
6.9 s
9.1 s
2.8 s
4.0 s
8 x 8 UNSIGNED
MULTIPLY ROUTINE
8 x 8 SIGNED MULTIPLY
ROUTINE
;
; ARG1 * ARG2 ->
; PRODH:PRODL
;
; ARG1 * ARG2 ->
; PRODH:PRODL
; Test Sign Bit
; PRODH = PRODH
;
;
; Test Sign Bit
; PRODH = PRODH
;
@ 10 MHz
102.6 s
27.6 s
36.4 s
96.8 s
11.2 s
16.0 s
Time
400 ns
2.4 s
- ARG1
- ARG2
DS39609B-page 85
@ 4 MHz
242 s
254 s
69 s
91 s
28 s
40 s
1 s
6 s