W7100A-64QFN WIZnet, W7100A-64QFN Datasheet - Page 92

no-image

W7100A-64QFN

Manufacturer Part Number
W7100A-64QFN
Description
8-bit Microcontrollers - MCU 8051 CORE+HARDWIRED TCP/IP+MAC+PHY
Manufacturer
WIZnet
Datasheet

Specifications of W7100A-64QFN

Rohs
yes
Interface Type
UART

Available stocks

Company
Part Number
Manufacturer
Quantity
Price
Part Number:
W7100A-64QFN
Manufacturer:
WIZNET
Quantity:
1 400
© Copyright 2011 WIZnet Co., Inc. All rights reserved.
Value
0x01
0x02
0x04
and RECEIVE. After W7100A identifies the command, the Sn_CR register is automatically
cleared to 0x00. Even though Sn_CR is cleared to 0x00, the command is still being processed.
To verify whether the command is completed or not, please check the Sn_IR or Sn_SR
registers.
Sn_CR (SOCKET n Command Register)[R/W][0xFE4001 + 0x100n][0x00]
This is used to set the command for SOCKET n such as OPEN, CLOSE, CONNECT, LISTEN, SEND,
CONNECT
Symbol
LISTEN
OPEN
SOCKET n is initialized and opened according to the protocol selected in
Sn_MR (P3:P0). The table below shows the value of Sn_SR corresponding
to Sn_MR
This is valid only in TCP mode (Sn_MR(P3:P0) = Sn_MR_TCP).
In this mode, the SOCKET n is configured as a TCP server which is
waiting for connection-request (SYN packet) from any “TCP CLIENT”.
The
SOCKET_LISTEN.
When a client’s connection request is successfully established, the
Sn_SR changes from SOCK_LISTEN to SOCK_ESTABLIESHED and the
Sn_IR(0) becomes ‘1’. On the other hand, Sn_IR(3) is set as ‘1’ and
Sn_SR changes to SOCK_CLOSED during a connection failure(SYN/ACK
packet failed to transfer)
cf> If the destination port of the TCP Client does not exist during a
connection request, W7100A will transmit a RST packet and Sn_SR is
unchanged.
This mode is only valid in TCP mode and operates the SOCKET n as a
TCP client.
A connect-request (SYN packet) is sent to the TCP server by connecting
to the IP address and port stored in destination address and port
registers (Sn_DIPR0 and Sn_DPORT0)
When a client’s connection request is successfully established, the
Sn_SR
S0_MR_MACRAW(0x04)
Sn_MR_CLOSE(0x00)
Sn_MR_IPRAW(0x03)
S0_MR_PPPoE(0x05)
register
Sn_MR_UDP(0x02)
Sn_MR_TCP(0x01)
Sn_MR(P3:P0)
changes
Description
the
SOCK_MACRAW(0x42)
SOCK_IPRAW(0x32)
SOCK_PPPoE(0x5F)
SOCK_INIT(0x13)
SOCK_UDP(0x22)
state
Sn_SR
-
from
Ver. 1.12
SOCK_INIT
to
92

Related parts for W7100A-64QFN